ENGLISH
SPECIFICATIONS
Important: Read complete instructions before beginning installation.
Each bath arrives ready for installation, completely equipped with blower motor, pump/motor assembly, heater, and plumb-
ing necessary for operation.
Remove the bath from the carton. Retain the shipping carton until satisfactory inspection of the product has been made.
Do
not lift the bath by the plumbing or wiring at any time; handle by the shell only.
Immediately upon receipt, inspect the shell before installing. Should inspection reveal any damage or defect in the finish, do
not install the bath. Damage or defect to the finish claimed after the bath is installed is excluded from the warranty. Jacuzzi
Whirlpool Bath's responsibility for shipping damage ceases upon delivery of the products in good order to the carrier. Refer any
claims for damage to the carrier. For definitions of warranty coverage and limitations, refer to the published warranty informa-
tion packed with the product.
All bath units are factory tested for proper operation and watertight connections prior to shipping.
Note: Prior to installa-
tion, the bath must be filled with water and operated to check for leaks that may have resulted from shipping damage
or mishandling.
Jacuzzi Whirlpool Bath
©
is not responsible for any defect that could have been discovered, repaired, or
avoided by following this inspection and testing procedure.
(Blower)
(Motor)
END VIEW
H
W
SIDE VIEW
L
4"
2"
ALLUSION SIDE END
(Heater)
DRAIN/OVERFLOW
A
B
SPECIFICATIONS
(Rectangular)
RECTANGULAR BATHS
NOTE: The overall dimensions are nominal with a tolerance of +0 and -1/4".
FOR ALL UNITS:
Electrical Service Requirements
:
All require a dedicated GFCI protected separate circuit.
Blower: 120 VAC, 20 AMP, 60 Hz. dedicated GFCI protected separate circuit.
Motor/Pump and RapidHeat
TM
: 240 VAC, 20 AMP, 60 Hz. dedicated GFCI protected separate circuit.
ALLUSION 7242
ALLUSION 6636
ALLUSION 7236
72"
(1829 mm) L
42"
(1067 mm) W
26"
( 660 mm) H
66"
(1676 mm) L
36"
( 914 mm) W
26"
( 660 mm) H
72"
(1829 mm) L
36"
( 914 mm) W
26"
( 660 mm) H
Not Available
Not Available
85 U.S. gal
(322 liters)
240 lb
(73 kg)
55 U.S. gal
(208 liters)
200 lb
(59 kg)
70 U.S. gal
(265 liters)
220 lb
(66 kg)
Not Available
856 lb
(389 kg)/
52 lb/sq. ft.
(253 kg/m
2
)
1001 lb
(455 kg)/
56 lb/sq. ft.
(272 kg/m
2
)
1246 lb
(566 kg)/
59 lb/sq. ft.
(289 kg/m
2
)
17-3/8" (441 mm) A
11-15/16" (210 mm) B
17-3/8" (441 mm) A
11-15/16" (210 mm) B
17-3/8" (441 mm) A
11-15/16" (210 mm) B
Template
Provided
P/N
BY20000
Template
Provided
P/N
BY20000
Template
Provided
P/N
BY20000
Factory Installed
(BN60000 HEATER 230V)
MODEL
PRODUCT
WEIGHT
OPERATING
GALLONAGE
TOTAL WEIGHT/
FLOOR LOADING
DIMENSIONS
DRAIN/OVERFLOW
SKIRT &
MOUNTING
CUTOUT
HEATER READY
FOR FIELD
INSTALLATION
Factory Installed
(BN60000 HEATER 230V)
Factory Installed
(BN60000 HEATER 230V)
1
Jacuzzi Whirlpool Bath
©
BR28000B 4/05
