background image

PRIOR TO  INSTALLATION

4

4

Carefully read and follow all instructions contained in this operating manual. Failure to do so may cause 

injury, inhibit the operation of the pool cleaner, or damage your pool. 

This cleaner was not designed to be the first clean at the beginning of the season. If you have a vinyl 

pool, check for wear and tear, creases in the vinyl, or any obstructions under the liner. If your pool has 

any of the previously mentioned defects, please consult a pool professional prior to use of cleaner. Pool 

must be cleaned of algae or debris prior to the cleaner’s first use. 

PRIOR TO  USE:  Install the brush before use to avoid possible dirt leaks.

PREPARING YOUR  POOL:

1. Make sure the chemical balance in your pool water is correct. 
2. Brush your pool and let any debris settle.
3. Vacuum  your pool using a manual vacuum cleaner. Your pool should be free of heavy debris and algae           

   prior to first use. It is not meant for initial pool start-up or opening.
4. Clean your pool filter, skimmer basket, and pump strainer basket.
5. Close the pool main drain (if your pool has one). 

CHECK CONTENTS:

ITEM 

NAME 

QUANTITY 

Cable 

Power Supply Unit 

Manual & Certificate 

Brush 

Safety Rope 

 

Summary of Contents for Comet















Reviews: