Elara
™
7242
purE air® Bath
technical Specifications
DimEnSionS
72” L x 42” W x 26” H
(1829) mm L x (1067) mm W x (660) mm H
Drain/ovErflow
A: 18-1/2” (470 mm) B: 10.6” (269 mm)
Cutout
70” x 40” & undermount template BZ50000
total wEight
1345 lb. (610 kg) / 64 lb/ft
2
(312 kg/m
2
)
opErating gallonagE
86 U.S. Gal. (326 Liters)
Min 66 U.S. Gal. (250 liters)
Max 105 U.S. Gal. (397 liters)
proDuCt wEight
215 lb (98 kg)
Skirt mounting
Not Available
ElECtriCal SpECifiCationS
requires a dedicated gfCi protected separate circuit.
Blower: 120 VAC, 15 AMP, 60 Hz.
hEatEr (StanDarD)
No water heater is available on this unit. Blower has integral air heater.
© 2008 Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino, CA 91710 • www.jacuzzi.com
inStallation notES
Refer to installation instructions included with fixture before
beginning installation. Please confirm product availability and
specifications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
#GD83000 01/08
ga30
Elara™ 7242 Pure Air® Bath, Left Hand
ga40
Elara™ 7242 Pure Air® Bath, Right Hand
• Right and Left Hand Drain Location
• Accessories / Hardware:
Sch 40, Rotoary Drain Kit: #DA34
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(845) – Oil Rubbed Bronze
DRAIN/OVERFLOW
A
B
END VIEW
H
W
SIDE VIEW
L
1/2"
(13 mm)
(Blower)
72"
42"
21"
4.2"
9.6"
12" x 4"
2"
Opt. Service
Access
12" H x 24" L
Service Access
Elara™ 7242,
Left Hand
Blower
product Shown: Elara™ 7242 pure air®
left hand model: ga30
* Measurements inside unit represent
cutout in floor to allow for drain/overflow.
