background image

Comfort PLUS Whirlpool Bath

Installation and Operation 

www.jacuzzi.com

 

Page 5

English

Safety Instructions (Cont)

 

CAUTION

:  

This equipment is intended for indoor use only. Install the 

 

 

 

equipment in accordance with these instructions. Use supply  

 

 

 

wires that are suitable for 167°F (75°C), including the  

 

 

 

temperature rating of the supply conductors to be used. This  

 

 

 

unit should be electrically grounded and installed by a licensed  

 

 

 

contractor, electrician, and plumber. Building materials and  

 

 

 

wiring should be routed away from the motor/pump or blower or  

 

 

 

other heat producing components of this unit. A pressure  

 

 

 

wire connector is provided on the exterior of the motor/pump  

 

 

 

and heater to permit connection of an No. 8 AWG solid copper  

 

 

 

bonding conductor between this unit and all other electric  

 

 

 

equipment and exposed metal in the vicinity, as needed to  

 

 

 

comply with local requirements.

 

When using this electrical equipment, basic safety precautions should 

always be followed, including the following:

 

WARNING

: RISK OF ACCIDENTAL INJURY OR DROWNING! CHILDREN 

 

 

SHOULD NOT USE HYDROMASSAGE BATHTUB WITHOUT  

 

 

ADULT SUPERVISION.

 

WARNING

: RISK OF ACCIDENTAL INJURY OR DROWNING! DO NOT 

 

 

USE HYDROMASSAGE BATHTUB UNLESS ALL SUCTION  

 

 

GUARDS ARE INSTALLED TO PREVENT BODY AND HAIR  

 

 

ENTRAPMENT.

 

WARNING

: TO AVOID INJURY, ExERCISE CARE WHEN ENTERING OR 

 

 

ExITING THE HYDROMASSAGE BATHTUB.

 

WARNING

: RISK OF ACCIDENTAL INJURY OR DROWNING! DO NOT 

 

 

USE DRUGS OR ALCOHOL BEFORE OR DURING THE USE OF A  

 

 

HYDROMASSAGE BATHTUB EQUIPPED WITH A HEATER TO  

 

 

AVOID UNCONSCIOUSNESS AND POSSIBLE DROWNING.

 

WARNING

: RISK OF FETAL INJURY! PREGNANT OR POSSIBLY 

 

 

PREGNANT WOMEN SHOULD CONSULT A PHYSICIAN BEFORE  

 

 

USING A HYDROMASSAGE BATHTUB EQUIPPED WITH A  

 

 

HEATER.

 

WARNING

: RISK OF HYPERTHERMIA AND POSSIBLE DROWNING: DO 

 

 

NOT USE A HYDROMASSAGE BATHTUB EQUIPPED WITH A  

 

 

HEATER IMMEDIATELY FOLLOWING STRENUOUS ExERCISE. 

 SAVE THESE INSTRUCTIONS . 

 

WARNING

:  

Do not operate this unit without the guard over the intake for 

 

 

 

the circulation pump (suction cover/strainer).

Summary of Contents for HE96000





























Reviews: