J-200 Series
To ensure optimum performance, clean and reuse the skimmer bag and
filter cartridge once a month or as necessary, depending on use.
J-210 models include filters on their footwell suction covers
(shown right) that prevent debris from entering the pump and
the massage selector(s), when operating. These filters must
remain in place to protect these components from debris
entrapment/damage. They should be cleaned every 2 months,
or when weak pump performance is observed.
J-230, J-270 and J-280 Models:
These model spas are equipped with a skimmer bag and one high
performance pleated filter cartridge located under the filter cover as
illustrated below. Debris are filtered by the optional circulation pump
(when equipped) drawing water through the skimmer bag and filter
cartridge 24-hours a day, or by jets pump 1 when running a programmed
filter cycle or when manually activated by spa use. Combined, both
filters provide unsurpassed water quality by trapping surface oils and
suspended particles. The filter cartridge should be cleared once a month,
or as needed for optimum performance.
J-230, J-270 and J-280 Models:
Refer to steps A-J below for complete filter cleaning/replacement
instructions.
a
DanGer:
Turn power To spa oFF! To DeCrease
risk oF Death, Drowning, or entraPMent,
never operaTe spa wHen FIlTer Is noT properlY
InsTalleD or IF skImmer assemBlY Is DamaGeD or
alTereD!
(Inside Spa
View)
B
Lift upward on filter
skimmer cover handles
to remove it from
mating retainer clips.
(Filter Cover Back View)
C
Remove skimmer bag
from clips, then clean
out debris.
(Inside Spa View)
D
Rotate filter
cartridge handle
counterclockwise to
unthread filter cartridge
from mating wall fitting.
33
