29
J-300 series
J-300 Series
standard Filtration/heating Modes
F0
5 minutes of filtration per day (one 5 minute “Blow-Out”
cycle every 24 hours to purge all plumbing lines)
F1
1 hour of filtration per day (one 30-minute cycle every 12
hours);
This is the factory default setting.
F2
1.5 hours of filtration per day (one 30-minute cycle every
8 hours)
F3
2 hours of filtration per day (one 30-minute cycle every 6
hours)
economy Filtration/heating Modes
F4
1 hour of filtration/heating per day (one 30-minute cycle
every twelve hours)
F5
1.5 hours of filtration/heating per day (one 30-minute
cycle every eight hours)
F6
2 hours of filtration/heating per day (one 30-minute cycl
e
every six hours)
lock modes
l1
Lock Out: disables all spa functions to permit filter
cleaning.
l2
Lock Mode: disables the jets and light buttons to prevent
unauthorized use of spa. Filtration/heating cycle will
continue to operate as programmed in this mode. The temperature
display flashes when this function is enabled. Example: The “F3”
filtration/heating cycle was enabled prior to choosing lock mode. The
spa continues to perform the “F3” cycle until lock mode is canceled,
allowing another cycle to be selected.
To set a time for the first filtration/heating cycle, simply turn power on to
the spa two minutes prior to the desired time. Example: If you desire your
first filtration/heating cycle to begin at 10:00 AM turn off power to the spa
and turn it back on again at 9:58 AM.
note:
Start time is approximate and may vary slightly from day to day.
29
Summary of Contents for J - 355
Page 1: ...owner s manual J 3 0 0 S e r i e s J 315 J 325 J 335 J 345 J 355 J 365 J 375 2530 398W Rev A...
Page 66: ......
Page 67: ......
Page 68: ......
