25
J-300
9.0 Control Functions
9.1
Control Panel
A. CLEAR
RAY (
)Button:
Manually activates the
CLEAR
RAY
system for a one-
hour period.
B. CLEAR
RAY Indicator:
Lit when the CLEAR
RAY
is on.
C.
Light On/Off (
) Button Options:
Turns waterfall light, footwell
light, lighted cup holders and backlit pillows on in unison. Press
once for high intensity; press a second time for medium intensity;
press a third time for low intensity; press a fourth time to turn off. The
displayed color is changed using the light mode button (D) below.
D.
Light Mode (
) Button:
Selects one of 4 light color modes for
waterfall, footwell, cup holders, and pillow lights. See page 29 for
additional information.
E.
Cooler ( ) Button:
Decreases water temperature set point. Also
used to navigate through the programming menus.
F.
Warmer ( ) Button:
Increases water temperature set point. Also
used to navigate through the programming menus.
G.
Jets 1 (
1
) Button:
Turns jets pump #1 on and off.
H.
Jets 2 (
2
) Button (J-335 to J-385):
Turns jets pump #2 on and
off.
I.
Menu ( ) Button:
Allows access to the programming menus.
J.
LCD Display:
Can display current water temperature (default
display), water temperature set point, selected menu functions, and
error messages.
Operation Details
• Temperature Adjustment: 65 to 104°F (18 to 40°C). Factory default
setting is 100°F (38°C).
• CLEAR
RAY
Operation: System runs for 1 hour (when manually
activated), then automatically shuts off.
• Light Operation: All LED lights run for 2 hours, then automatically
shut off.
• Jets 1/Jets 2 Button Operation: Jets run for 20 minutes when
activated, then turn off automatically to conserve energy. Simply
press either jets button to continue operation for an additional 20
minutes.
2
I
B
A
2-Pump Control Panel Shown
E
C
D
F
H
1
G
J
Summary of Contents for J - 375
Page 6: ...J 300...
