Page 27
J-400 Series
10.6
light mode Button
This button offers 4 light modes for your enjoyment. Press this
button to select your favorite lighting effect as follows:
Press
Once
Press
Again
Press
Again
Press
Again
Solid Color Mode:
Selects one of 7 solid (high-intensity) colors of choice.
AMBER (X7)
GREEN (X8) AQUA (X9)
NEAR
WHITE (X10)
BLUE (X4) VIOLET (X5) RED (X6)
Freeze Color Blend Mode:
Selects or “freezes” your low speed blending color of choice.
Low-Speed Color Blend Mode:
Displays hundreds of colors in 20 seconds intervals.
High-Speed Color Blend Mode:
Displays hundreds of colors in 5 second intervals.
10.7
adjusting Individual Jet Flow
The water flow to certain jets in your spa can be increased or
decreased by rotating the outside jet face.
note:
Always keep at least 6 adjustable jets open at all times.
10.8
adjusting PowerPro™ mX2 Jets
Tilt PowerPro MX2 Jet nozzle to angle of choice as desired.
Rotate nozzle
clockwise
to reduce flow volume from jet or
rotate counterclockwise
to increase flow volume.
note:
Always keep at least 6 adjustable jets open at all
times.
10.9
adjusting rX Jets
Turn center jet adjustment knob clockwise to decrease or
shut off water flow. Turn center jet adjustment knob
counterclockwise
to turn on or increase water flow.
note:
Always keep at least 6 adjustable jets open at all
times.