63
WaterColour™ Waterfall Control
Turn waterfall control valve counterclockwise to increase wa-
terfall output. Turn control valve clockwise to decrease or turn
off waterfalls.
Note:
When the waterfall is in the OFF position, some water may
still flow through. This is considered normal.
Air Controls
Certain jet systems have their own air control. Each control in-
troduces air into the water lines that supply that specific jet
group. Simply rotate any air control clockwise to open or rotate
counterclockwise to close. To minimize heat loss, all air controls
should be closed when the spa is not in use.
Note:
Certain jets may draw air even though they are closed. This
is considered normal.
Selecting the Desired Massage Action
Your Jacuzzi spa is equipped to allow you to customize the
massage action you desire. Each model incorporates a massage
selector that allows you to customize the massage and perfor-
mance by diverting water between various jet systems. Simply
turn the massage selector to position A (Combo), B, or C to di-
vert water pressure to various jet groups.
Note:
The massage selector valve(s) is designed to operate in posi-
tions A(Combo), B, and C for optimum performance. It is conside-
red normal for sound levels within the valve to vary between posi-
tions due to the large amounts of water flowing through it. For op-
timum filtration benefits, leave the valve in the center position
when the spa is covered. Select position B or C for maximum jet
performance during spa use.
Indicator Light
The indicator light located on the front cabinet panel of the spa
is an early detection system that will notify you when the spa
needs immediate attention. A solid white light indicates that all
operations are normal. A solid red light indicates that immedia-
te attention is required to clear or fix an error code. For a detai-
led explanation see section titled “Error/Display Messages”.
Programming and Operation Instructions
Your Jacuzzi spa is equipped with setting menus that allow you to
program and activate different components of the spa. With our
ProTouch™ control panel, programming your spa has never been
easier. In the sections that follow, we will guide you through the
process of programming the spa to fit your personal comfort.
Tap (
)
to enter the Settings Menu.
Provides access to the heating and filtration
programming.
Provides access to the water care program
ming.
Provides access to the Wi-Fi programming.
Provides access to the locking programming.
Provides access to the time and date program
ming.
Provides access to the language program
ming.
Provides access for the temperature display in
or
. Default setting is
.
Back Button:
Tap to go back to the previous menu.
Invert Button:
Tap to invert the display image.
Scroll up and down to view the selections available.
I
Programming the Heating Mode
Your Jacuzzi spa is equipped with 3 modes of heating.
An automatic mode called “Auto,” where the spa’s temperature
is maintained at all times. An energy saving heating cycle cal-
led “Econo.” A mode that will only activate the heater during
the daytime called “Day” mode.
Note:
The heater will activate when the temperature drops ~1°
from the set temperature.
Indicates that the feature is active.
Indicates that the
feature is not active.
Auto
Econo
Day
Filter
2
1
Heat & Filter
Fº
Cº
Fº
Units
Language
Time & Date
Lock
WiFi
Water Care
Heat & Filter
100
6:45p
Heat & Filter
Water Care
Units
SETTINGS
B
C
A
