75
“CLOSED FLOW SWITCH ON START-UP”
Flow switch is non-functional. Closed or shorted flow switch
on system start-up (system disabled).
I
Contact your authorized dealer or service organization.
“FROZEN ON START-UP”
Flow switch is non-functional. Shorted flow switch on system
start-up (system disabled) and freeze condition detected.
I
Contact an authorised Jacuzzi® retailer.
“COOL WARNING”
Spa water is more than 20°F/11°C cooler than the temperature
set point, the circulation pump and heater will automatically
activate to provide freeze protection. The spa will stay in this
mode until the water temperature reaches 15°F/-9.44°C below
the set temperature.
I
No corrective action is necessary.
Note: The heater icon (
) will be blinking and the error i-
con (
) will be displayed under the temperature.
“FREEZE PROTECTION”
A potential freeze condition has been detected. No action is
required. Jets pump(s) operate until the spa is out of danger.
No corrective action is necessary.
I
If the problem persists, contact your authorised Jacuzzi®
retailer.
“OVERHEAT PROTECTION”
Do not enter the water!
Water temperature is above acceptable limits. Heater is deac-
tivated. Remove spa cover to speed cooling.
I
If the problem persists, contact your authorised Jacuzzi®
retailer.
Note: The heater icon (
) will be blinking and the error i-
con (
) will be displayed under the temperature.
Risk of hyperthermia, burns, scalds or bruising.
“WATCHDOG PROTECTION”
DO NOT ENTER SPA!
Water temperature is above acceptable limits. Your spa is
deactivated. Remove spa cover to speed cooling.
I
If the problem persists, contact your authorised Jacuzzi®
retailer.
Note: The heater icon (
) will be blinking and the error i-
con (
) will be displayed under the temperature.
Risk of hyperthermia, burns, scalds or bruising.
“WATCHDOG FREEZE PROTECTION”
Spa water is below 40°F/4.4°C. Jet pumps operate until the spa
is out of danger.
I
Contact your authorised Jacuzzi® retailer.
Note: The heater icon (
) will be blinking and the error i-
con (
) will be displayed under the temperature.
“CONTROLLER OVERHEAT PROTECTION”
Controller temperature has exceeded acceptable limits. If con-
dition persists, provide shade for equipment side of spa.
I
Contact your authorised Jacuzzi® retailer.
Note: The heater icon (
) will be blinking and the error i-
con (
) will be displayed under the temperature.
“PANEL COM ERROR”
The topside controller is having trouble communicating to your
spa.
I
Contact your authorised Jacuzzi® retailer.
“STEREO COM ERROR”
The stereo is having trouble communicating to your spa.
I
Contact your authorised Jacuzzi® retailer.
“WI-FI COM ERROR”
The Wi-Fi module is having trouble com-
municating to your spa.
I
Contact your authorised Jacuzzi® retailer.
“CLEARRAY REPLACEMENT REMINDER”
This message will appear when the CLEARRAY bulb reminder
time has expired.
I
The CLEARRAY bulb must be replaced.
“PROCLARITY/PROCLEAR FILTER REMINDER”
This message will appear when the filter reminder time has
expired.
I
Remove the ProClarity/Proclear filters and filter/debris bag for
cleaning or replacement.
ON
100
6:45p
ON
ON
ON
ON
Reminder
It’s time to replace your
CLEARRAY bulb. Contact
your authorized dealer for
replacement parts.
snooze
reset
Reminder
It’s time to clean or replace
your ProClarity and Pro-
Clear filters. Contact your
authorized dealer if new
filters are needed.
snooze
reset
