29
J-445/J-435 Export
Once you register your spa online, you can
then enter the registration information into the
control panel.
Note:
If a number is entered wrong you can tap
to move backwards.
1. From the registration screen, tap
enter #
to enter the spa serial number.
2. Input the 9-digit serial number, Figure
10.2b. If your serial number begins with a letter, use the
or buttons until the letter is displayed.
3. Tap to enter and save the information.
10.3 ProTouch™
Control Panel
The J400 ProTouch system makes operating your spa a breeze. You can
navigate through the menus and sub-menus with ease. Simply touch the
icons on the LCD display to begin operating your new Jacuzzi spa.
A.
Home Menu Control Buttons
The Home Menu, Figure 10.3a, provides access to spa functions and
programming. Operation is made easy by the interactive control panel.
If there is no activity for 5 minutes, the LCD display will time-out into a
sleep mode. To reactivate the display, just tap the display screen. When
a feature is on, the button will have a blue inner glow.
= Temperature Control:
Allows you to adjust the set
temperature of the spa:
• Increase the temperature by tapping
in 0.5°C (1°F)
increments.
• Decrease the temperature by tapping
in 0.5°C (1°F)
increments.
Note:
The temperature range for the spa is 18.33 to 40°C (65 to 104°F).
To activate the
Extended Temperature feature
that allows the spa to
= Jet Button:
Tap to access the menu to operate the jets pump,
Figure 10.2b
Enter Spa Serial #
100
6:45p
Figure 10.3a
Summary of Contents for J-435
Page 1: ...J 435 J 445 EXPORT OWNER S MANUAL 6530 274EE Rev C...
Page 6: ......
Page 79: ......
Page 80: ......
