Jacuzzi J - 480 Use, Installation And Maintenance Instructions Download

Page: 44 / 160

N.B.:

the unit returns to volume mode if the volume control is

not rotated for 3 seconds.

Scan Functions

Select any AM or FM band and press the scan button (11) to lis-
ten to a few seconds of each radio station.: The display will flash
and the radio will automatically scan to the next higher station.
It will play that station for a few seconds, then scan to the next
higher station.

To stop scanning and continue listening to the current station,
press the scan button a second time.

N.B.:

the radio remains in scan mode until the scan button is

pressed a second time or one of the tune buttons is pressed.

Preset scan function

Press the auto button (16) once to enter scan mode. The next
higher preset station will be selected and be played for 3 sec-
onds while the preset number on the display flashes.

If you wish to remain on this station, press the auto button (16)
a second time.

N.B.:

preset scanning continues unless you press the auto

button (16) or either preset button (P1-P6) to cancel.

Local/distance function

Press the local button (10) to toggle between local and distant
station mode. When “LOCAL” is displayed, only the strongest s-
tations will be selected during seek or scan.

N.B.:

in the default mode (the word LOCAL does not appear

on the display), all usable stations will be selected during
seek or scan.

CD Player Operation

Inserting, playing, and ejecting a CD

Open the front panel and insert a CD into the slot (the CD la-
bel facing up): the CD will be drawn inside by the motorized
mechanism. Close the front panel. The “DISC IN” symbol on the
display indicates that a CD is in the drive.

To play the CD: press the source button (4) to change to CD
mode: the CD will play. The display shows the current track and
play time. The display will animate a 3-D rotating disc while the
CD is playing.

N.B.:

if the CD play time is not shown, press the clock button

(9) once.

To remove the CD: open the front panel and press the CD eject
button located under the front panel. Remove the CD from the
drive and close the front panel.

N.B.:

listen for an audible click to ensure the front panel is closed

to prevent water seeping in, which could damage your unit.

Changing CD Tracks And Music Seek

To advance to next track, press button (13) once; ; When the fi-
nal track is reached on the CD, play will resume from track 1.
To fast forward through tracks: press and hold the tune/seek up
button (13) until the track counter displays the desired track, then
release the button.

To return to the beginning of the current track: press button
(14). Pressing it a second time within 1 second will skip back to
the previous track.

To rewind the current track: press and hold the tune/seek down but-
ton (14): the track will quickly rewind until you release the button.

Intro Scan, Random, Repeat

Intro Scan Mode:

press intro button (21) to enter intro scan mode.

The left side of the display reads “SCN” and the first 10 seconds
of each CD track will play continuously until you press the intro
button a second time, or press either tune/seek-up button (13)
or tune/seek-down button (14).

Random Mode: press the random button (19) to play the CD
track in a random order. The left side of the display reads “RDM”
when random mode is enabled.

Repeat Mode:

press the repeat button (18) to repeat the cur-

rent CD track continuously. The left side of the display reads
“RPT” when the repeat mode is enabled.

CD tuner- Troubleshooting

Unit will not turn on.

Make sure the spa power is turned on, then check both harness fus-
es on the back of the unit, making sure they are the proper ratings:

- Yellow memory B+ line (1A fuse)
- Red ACC line (10A fuse).

With the spa power off, use a thin rod to press the reset button
located under the front panel.

Fogged CDs And Lens

This condition may occur when it is cold.
Wipe fogged CDs with a soft cloth. Fogged optical components
inside the unit will return to normal operation after an hour.

iPod connector

This connector is compatible with all iPod models that have
this type of connection (“dock”).

Connecting the iPod to the audio system of the spa

1) Open the door by pulling the handle outwards.

2) Insert the iPod on the connector, pushing slightly.

3) Then close the door, as shown.