38
J-400
10.0 Registration and Start-up
10.1 Start-up Sequence
During the start-up sequence, the welcome screens will appear, Figure
10.1a. Then a blow out cycle will begin, page 52. After the cycle ends,
the hot tub will display the Home Menu.
Note:
• The start up menu will time out after approximately 3 seconds.
• The exterior lights flash on and off to indicate a connection.
10.2 Register Your New Spa
Registering your spa is important in
order to validate your warranty. To
register you will need to have the spa
serial number, Figure 10.2a, then you
will need to register online at
www.Jacuzzi.com.
Follow these steps to register your spa.
1. Using your home computer or other device, connect
to the internet.
2. Go to www.Jacuzzi.com website to register your spa.
3. Click
Outdoor Hot Tubs
4. Click
For Owners
5. Click
Warranty and Manuals
6. Click
Warranty Registration
7. Enter your serial number.
Keep a record of your serial number for any future reference. Write that
information below.
Serial Number:
Figure 10.1a
WELCOME
Spa 2.00 / Panel 2.36
WELCOME
Serial Number
Figure 10.2a