41
J-400
= Jets Pump 1 Button
= Jets Pump 2 Button
= Jets Pump 3 Button (if applicable)
= Back Button:
Tap to go back to the previous menu.
= Invert Button:
Tap to invert the display image.
1. Tap the Jets 1 button to turn the pump on and off.
2. Tap the Jets 2 button to turn the pump on and off.
3. Tap the Jets 3 button to turn the pump on and off.
Note:
• When a jets pump is on, the button will have a blue inner glow.
• Auto Turn Off — Anytime a pump has been manually turned on, it will
automatically turn off after approximately 20 minutes. If at this time you
desire more jet operation you may simply turn the pump(s) back on.
11.3 Lights Menu
From the Home Menu, (Figure 11.3a), tap to enter the Light submenus.
The LCD screen will display the Light Submenu (Figure 11.3b). From this
menu you can control the hot tub lighting. When you tap to enter the
submenu, the lights will turn on, if not on already, in a color blending mode.
Default settings are brightness level at 0 and speed setting of 0.
Note:
The interior lights automatically turn off after 2 hours. They can be
reactivated if needed.
= Brightness Up Button:
Tap to raise the intensity of the lights
to the maximum level of 5. The intensity levels are as follows:
5 = 100%, 4 = 80%, 3 = 60%, 2 = 40% and 1 = 20%, 0 = 0%.
= Brightness Down Button:
Tap to lower the intensity of the
lights to the minimum level of 0.
1
2
3
JETS ICON
WHEN OFF
JETS ICON
WHEN ON
1
1
100
6:45p
LIGHTS
Speed: 1
Figure 11.3a
Figure 11.3b
