57
J-400
D.
To Unlock (Figure 12.8c):
1. Enter the Lock menu. The type of lock that is
active will already be highlighted in Orange.
2. Tap
(the first block) to start entering the
code. Then move on to the next number until
the four-digit unlock code has been entered.
3. Tap to unlock.
4. Tap
a few times to exit the menu.
Note:
A default passcode can be used in case the
original passcode is lost or forgotten. The code “0772” will unlock the
locked setting.
12.9 Programming the Time and Date
From the Settings Menu, tap or to highlight the “Time & Date”
menu tab in Orange. Tap
Time & Date
to enter the programming
options, Figures 12.9a and 12.9b.
A.
To set the time:
The default time setting is a 12-Hour
configuration. To choose the 24-Hour
configuration, then tap
24
to change the setting.
1. When you enter the menu,
Time
will be
highlighted Orange, Figure 12.9c.
2. Tap the hour block
12:30
to program.
3. Tap or to change the hour in 1-hour
increments. To switch from “AM” to “PM” you
must round a 12-Hour period.
4. Tap the minute block
12:30
to program.
5. Tap or to change the minutes.
6. Tap to confirm and save your changes.
B.
To set the date:
Each setting for month, day and year can be set
independently.
1. Tap
Date
to program the date, Figure 12.9d.
2. Tap the month block
1 30 2015
to program.
3. Tap or to make changes.
4. Tap the day block
1 30 2015
to program.
5. Tap or to make changes.
Lock
Unlock
Figure 12.8c
Lock
Time & Date
Language
SETTINGS
Date
pm
24
12:30
Time & Date
Time
Figure 12.9a
Figure 12.9b
Figure 12.9c
Date
pm
24
12:30
Time & Date
Time
Time
Date
Time & Date
24
1 30 2015
Figure 12.9d
