39
LX Collection
12.3 Pillow Care
Remove and clean the headrest pillows as
needed with soapy water using a cloth or
soft-bristle brush. Always remove the
pillows when adding chemical shock treatment to the spa water. The
pillows can be returned to the spa when the sanitizer reading is stable as
recommended on the inside cover of the manual.
12.4 Cleaning The Spa Interior
To preserve the sheen of your spa’s surface, it is crucial that you avoid
using abrasive cleaners or cleaners which have adverse chemical effect
on the surface. If you are not certain as to the suitability of a particular
cleanser, consult your authorized Jacuzzi dealer. Regardless of the
cleanser used, use extreme care to assure that no soap residue is left on
the surface. This could cause severe sudsing when the spa is refilled.
12.5 Maintaining the Cover
Using the Jacuzzi insulating spa cover anytime the spa is not in use will
significantly reduce your operating costs, heat-up time and maintenance
requirements. To prolong the life of the cover, handle it with care and
clean it regularly. Below are the care instructions.
A.
Standard Vinyl cover maintenance
To Clean and Condition the Vinyl Cover:
1. Use a garden hose to loosen debris and dirt.
2. Using a large sponge or a soft bristle brush, use diluted or mild soap
and scrub the vinyl top. Rinse clean and do not allow soap to dry on
cover. Do not use soap on the underside of the cover.
3. Please check with your Jacuzzi Dealer for recommended cover
care and conditioning products. Condition using non-petroleum
based conditioners to keep the vinyl supple and threads/stitching
from drying out. Do not use solvents, abrasive cleaners or strong
detergents. Do not use products that contain silicone or alcohol.
1
2
Place both hands on
pillow with thumbs as
shown.
Press inward with
thumbs to curl pillow
lip inward so you can
grab it with fingertips.
3
4
5
Flex pillow lip inward
2-3" to get a good
grip on the ends.
Gently pull outward on
pillow to release mounting
stud from receptacle on
spa shell.
Wash pillow(s) in a mild detergent soap and warm water solution. Never machine wash your pillows
or attempt to clean them with a non-approved vinyl cleaning agent!
6
To reinstall pillows: Simply align pillow over mounting stud receptacle, then gently push inward to
snap in place.
