40
LX Collection
B.
Sunbrella® cover maintenance
To Clean and Condition the Sunbrella Cover:
1. Brush off dirt, leaves and any loose debris.
2. Thoroughly hose down the cover.
3. Using a large sponge or a soft bristle brush, use diluted or mild soap
(such as woolite or dreft, no detergents) and scrub the cover. Allow
the solution to soak in.
4. Rinse clean and do not allow soap to dry on cover. Continue to
rinse until all the soap solution is removed. Do not use soap on the
underside of the cover. The fabric dries quickly allow it to air. Do not
apply heat or machine dry.
5. Retreating the fabric, using 303 High Tech Fabric Guard™, after
cleaning is highly recommended. Follow the instructions from the
manufacturer.
6. Additional cleaning and care information may be found at www.
NOTE:
Do not use solvents, abrasive cleaners or strong detergents. Do
not use products that contain silicone or alcohol.
C.
Additional Care and Maintenance Instructions:
1. Debris can accumulate on the spa cover. Removal of snow or other
debris will help to avoid breakage of the foam cores.
2. Be sure to lock the cover straps to secure the cover from unwanted
or accidental entry.
3. Do not place heavy objects on the cover.
4. Do not walk, sit or stand on the cover.
5. Do not drag or use the flaps/skirt or the cover lock straps to remove
the cover.
6. Use only recommended cover lift systems.
7. Use only chemicals and cleaners recommended by Jacuzzi.
8. Remember to keep spa covered when not in use. Maintaining proper
water levels assures efficient operation and efficient electrical usage.
9. Do not expose your spa to the sun for extended periods of time as
UV rays can damage the interior surface.
10. Use caution when removing cover. Before removing cover, assure all
locks have been released to avoid lock breakage and or cover strap
damage.
12.6 Maintaining The Synthetic Cabinet
Your new spa’s synthetic cabinet requires little or no maintenance of
any kind. To clean, simply wipe cabinet with a clean towel and mild soap
solution.
12.7 Top Rail Care And Maintenance
Parts should be cleaned with soap and water and a non-abrasive
cleaning pad. More stubborn stains can be cleaned with a water based
cleaning solution or cleaners specified for vinyl surfaces. Solvent based
or aggressive degreasing cleaners should not be used.
