Jacuzzi J-LXK Installation Manual And Use & Maintenance Download

Page: 28 / 64

Operating instructions

The spa control system has automatic functions that operate
upon start-up and normal operation.

Upon power up, the display shows the following information:

current version of software: 356 in models with circulation

pump; 556 in models without circulation pump

"888" (all LED indicators are on: control of operation of all dis-
play segments and indicator lights).

After the initial start-up sequence ends, the actual water tem-
perature is displayed. If water temperature is below 38° C (fac-
tory setting) and the spa is set in skimming/heating mode “F1-
F3”, the heater will come on. The heater goes off when water
temperature has reached 38° C.

N.B.:

it is normal for the heater to turn on after the spa is first

filled because tap water is often very cold.

Setting water temperature

The spa’s thermostat provides optimum control of water tem-
perature. The temperature set point (set temperature) can be ad-
justed from 18 °C to 40 °C. To increase the set temperature,
press button (+). To lower it, press (

–

N.B.:

The first press of either

WARMER ( + )

or COOLER ( - )

button displays the set temperature.

Pump activation

The control panel JETS 1 button activates jets pump 1. The first
press activates low speed, the second press activates high speed,
and the third press shuts jets pump 1 off. The JETS 2 button ac-
tivates jets pump 2. The first press activates high speed, the sec-
ond press turns jets pump 2 off. When manually activated, either
pump will automatically turn off after 20 minutes.

Light On/Off Button

Pressing this button activates the waterfall, footwell, accent
lights in unison as follows: high - medium - low - off.

Note: Lights automatically turn off after 2 hours.

Light Mode Button

This button offers 4 light modes for your enjoyment. Press this
button to select your favorite lighting effect as follows:
- High-Speed Color Blend Mode

- Low-Speed Color Blend Mode
- Freeze Color Blend Mode
-

Selects or “freezes” your low speed blending color of choice.

- Solid Color Mode

Selects one of 7 solid (high-intensity) colors of choice.

Selecting desired massage action

Each model incorporates a massage selector that allows you
to customize the massage and performance by diverting wa-
ter between various jet systems.

Simply turn massage selector to position

(Combo),

, to

divert water pressure to various jet groups.

N.B.:

he valve is designed to operate in positions A (Combo),

B, and C for optimum performance.
For optimum filtration benefits, leave the valve in position A
when spa is covered. Select position B or C for maximum jet
performance during spa use.

Waterfall Feature

The waterfall is on when jets pump 1 is running. Turn waterfall
control valve counterclockwise to increase waterfall output. Turn
control valve clockwise to decrease or turn off waterfall output.

Jet

The water flow through individual jets in your spa can be adjusted
or turned off by rotating the outside jet ring. Some jets offer an
adjustable center nozzle that allows you to change the water dis-
charge angle. Simply tilt the center nozzle in these jets to the de-
sired angle to customize your personal massage. Other jets of-
fer a spiral action that produces a surging stream of air and wa-
ter that provides a vigorous massage.
Note: Always keep at least 6 adjustable jets open at all times to
ensure proper filtration characteristics within the spa. Jets may
not spin with jets pump 1 running in low speed.

Air controls

Certain jet systems have their own “toggle” on/off air control. Each
control introduces air into the water lines that supply specific jet