Jacuzzi J-LXK Installation Manual And Use & Maintenance Download

Page: 39 / 64

Press either of these buttons to change music folders
(Device Mode USB)

Preset 1:

Press to access a preset station (Radio Mode)

Preset 2:

Press to access a preset station (Radio Mode)

Press once to repeat the song. Press again to repeat the
album (Device Mode USB)

Preset 3:

Press to access a preset station (Radio Mode)

Press to play songs in a random order (Device Mode USB)
Not used (Radio Mode)

Electronic Device Connections and Functions

CAUTION: RISK OF ELECTRICAL SHOCK OR EQUIPMENT
DAMAGE!

Never install, remove or operate any electrical de-

vice (e.g. Apple Device/MP3/USB/AUX/Bluetooth) while
hands are wet or while sitting partially or fully immersed in
the spa!

IMPORTANT:

If stereo unit is “ON” (blue light is illuminated on the

stereo power button) then press the power button on the re-
mote once.
If stereo unit is in “Standby” (red light is illuminated on the stereo
power button) then press the power button on the remote once
to activate the remote (remote LCD display will read “NO LINK”).
Press the button again to activate the stereo unit (remote LCD dis-
play will read “WELCOME”).

Operating the Radio:

Turn power ON to the stereo unit and remote.
The LCD screen on the remote will display the following: “Wel-
come,” “Load,” “Radio” and the station number.

You can use the seek button to search for frequencies. You can
save up to 3 stations as presets.
Follow the steps below to set a station:

Find a station you want to save.

Press and hold one of the three preset buttons. The station

number on the display will quickly flash to confirm the setting.
To set the additional two stations, conduct this step again.

Connecting Your Apple Device and MP3 Player Using the
USB:

- Locate the USB port in the stereo locker.
- Use a 30-pin cable for compatible devices or a cable provi-

ded with your device.

- Connect the USB end of the cable into the USB connection

on stereo.

- Connect the 30-pin end of the cable to the iPod/MP3 Player

(purchased separately).

- After connecting the cable to both devices, set the player in-

to the rubber holding base.

Note:

This also charges most compatible Apple device when

connected.

Note:

The DRM (Digital Rights Management) Files cannot be

played on this deck. Personal files (MP3, WMA, iTunes or
AAC) can be played as long as they are not DRM encrypted.

Operating MP3/USB/Apple Device:

- Turn power ON to the stereo unit. Turn power “ON” to the re-

mote.

- The LCD screen on the remote will display the following:

“Welcome,” “USB,” “Load,” “Apple” (final display will vary de-
pending on the device connected). All functions are perfor-
med through the remote.

- While the music is playing the remote screen will display

andcontinually scroll through the following: Artist, Album,
Song and Track information.

- For operational functions refer to the “External Media Devi-

ce Playback” section.

Operating the USB drive:

- Plug in your USB device into the “USB” connection on the stereo.
- Turn power ON to the stereo unit and the stereo remote.
- The LCD screen on the remote will display the following:

“Welcome,” “USB,” “Load,” “TOL XX” (final display will vary de-
pending on the whether the USB holds folders or files). All
functions are performed through the remote.

- While the music is playing the remote screen will display

andcontinually scroll through the following: Title, Song, Ar-
tist, Album, Dir, Music and Track information.

- For operational functions refer to the “External Media Devi-

ce Playback” section.

Connecting Your Auxiliary Player Using the 3.5 mm Cable:

- Plug one end of the cable to “Aux” connection on the stereo.
- Plug the other end of the cable into the head phone jack

connection on the Apple device/MP3 Player.

- Press the Mode button on the remote to “AUX IN”.
- All playback operations are conducted via the Auxiliary

Player. The stereo remote functions do not work on the ex-
ternal Auxiliary Player (except volume control).

Connecting Your Bluetooth Device:

- Turn power ON to the stereo unit.
- From your Bluetooth device, make sure the Bluetooth feature

is ON.