30
preliminary
operations
some
recommendations
F
irst of all, it is necessary to fill the tub; where Jacuzzi® brassware is used, ensure that
the lever on the back of the spout is positioned upwards
(in reverse, the water will come
out of the shower).
Q
Once immersed in the tub
, the water level must fully cover the nozzles on the backrest.
Q
Ensure that the hydromassage nozzles are facing toward the body parts to be mas-
saged.
It is also possible to vary, according to limits, the intensity of these jets, by rotating the
respective nozzle as indicated. In any case, substantial adjustments must be made using
the relative function (accessible from the J.touch remote control).
Q
Technically, the hydromassage duration varies in the range of 15 to 20 minutes; the
initial effects can be felt after just 5-10 minutes: you will feel revitalised, less stressed, the
muscles will be more toned, you will experience a general sense of well-being.
The hydromassage duration depends greatly on the water temperature: in order to
allow the body to get used to the hydromassage, begin with a session which does not
exceed 10 minutes, up until you reach a duration which is suited to your individual re-
quirements.
Q
Soap and bath foams must only be used when the hydromassage is not in use, just like
a standard bathtub.
we recommend filling the tub with al-
ready mixed water (hence, not boiling
water first followed by cold water)
The backrest jets are not adjustable.
Do not close the nozzles fully!
Before starting the hydromas-
sage, ensure that the nozzles are
not closed!
The higher the temperature, the less
time that must be spent in the hydro-
massage tub:
34-36 °C / 20 minutes
36-38 °C / 15 minutes
38-40 °C / 10 minutes
