2
A en on New Swim Spa Owner!
Congratula ons on the purchase of your new Jacuzzi™ swim spa! The following is a list of au-
tomated func ons performed by your swim spa. These func ons are listed below in an
a empt to suppress any opera onal concerns you may have during the first 24 hours of own-
ership! Also listed below are important maintenance recommenda ons you should observe
on a regular basis to protect your new investment.
Maintain Healthy Swim Spa Water
Always maintain your swim spa’s water chemistry within the following parameters:
With CLEARRAY®
Without CLEARRAY®
pH
7.4—7.6
7.4—7.6
Free chlorine
No less than 1.0 ppm
3.0—4.0 ppm
Free bromine
No less than 2.0 ppm
2.0—4.0 ppm
Total Alkalinity
100—150 ppm
100—150 ppm
Calcium Hardness
150—250 ppm
150—250 ppm
IMPORTANT: CLEARRAY
® Water Purifica on System is factory installed. If the CLEAR
RAY®
system is altered or is not opera ng efficiently then follow the “without CLEAR
RAY® water
chemistry parameters as defined by the Associa on of Pool and Spa Professionals. CLEAR
RAY®
requires an annual bulb replacement to properly sani ze your water.
TO DECREASE RISK OF INFECTION OR DISEASE! Always maintain your spa
filter as outlined below to ensure healthy spa water.
Required Filter Maintenance
Your new swim spa is equipped with an advanced water filtra on system that provides unsur-
passed water quality! To ensure maximum water quality at all mes, you should clean the
skimming filter cartridge every 3 months, or as necessary.
Required Water Replacement
You should replace the swim spa’s water every 3 months. The frequency depends on a num-
ber of variables including frequency of use, number of users and a en on paid to water qual-
ity maintenance. You will know it is me for a change when you cannot control sudsing
or you can no longer get the normal feel or sparkle to the water, even though the key water
balance measurements are within the proper parameters.
© Jacuzzi Hot Tubs, Inc. All Rights Reserved
