Jacuzzi J575 Installation - Use - Maintenance Download

Page: 42 / 84

Interior Lights Selection

: Tap (

)

enter the Interior Lights Menu.

Exterior Lights Selection

: Tap (

) to

change the intensity of the Exterior Lights.

Experience Mode Selection

: Tap (

)

to enter the Experience Mode Menu.

Back Button

: Tap to go back to the previous menu.

Invert Button

: Tap to invert the display image.

Setting Button

: Tap to access the programming and

setting menus.

Interior Lights:

The interior lights consist of the waterfall lighting, above (peri-
meter lighting) and under (footwell lighting). Each can be in-
dependently controlled or they can be controlled in unison.
You can control 3 aspects of the interior lights.

Tap (

)

or (

)

to scroll through the selections for “Water-

fall,” “Above,” “Under” and “All.” If you choose the “All” option,
then the lights will work in unison and display the same featu-
res and colors.

To control the intensity of the interior lights follow the
steps below.

The “Bright” feature controls the intensity of the inte-

rior lights. Use (

)

or (

)

to select your intensity level.

The levels range from 5 to 0, as follows: 5 = 100%, 4 = 80%,
3 = 60%, 2 = 40%, 1 = 20% and 0 = 0%.

Note:

The default intensity level is 3.

This feature is available for the following selections: “Water-
fall,” “Above,” “Under” and “All.”

To control the speed of the interior lights follow the
steps below.

The “Speed” feature controls the speed of the color

blending, measured in seconds. Use (

)

or (

)

to select

speed rotation. The levels range from 5 to 0, as follows: 5 = 5
secs, 4 = 10 secs, 3 = 15 secs, 2 = 30 secs, 1 = 60 secs
and 0 = single color.

Note:

The default speed interval is 0.

This feature is available for the following selections: “Water-
fall,” “Above,” “Under” and “All.”

To select a solid color for the interior lights follow the
steps below.

To make a selection tap the color

block on the display. Colors available are White, Blue, Green,
Yellow, Orange, Red, and Pink.

Note:

The default color will always be the last color used.

This feature is available for the following selections: “Water-
fall,” “Above,” “Under” and “All.”

Exterior Lights

The exterior corner lighting has 4 settings. The lights display a
solid White color only.

By continually tapping “

” you will scroll through the fol-

lowing:

OFF:

Exterior lights are turned off.

MID:

Solid White color with a 50% intensity level.

ON:

Solid White color with a 100% intensity level.

AUTO:

Solid White color with a 100% intensity level. Li-

ghts are on from 7:00 pm to 12:00 am.

Note:

“AUTO” is the default setting.

Experience

The lighting experience can be user enhanced by activating o-
ne of the settings below. Just tap one of the words (Quiet,
Fun, Glow or Joy) to start the experience. The default setting
is “Glow.”

Quiet:

All interior lights are a solid Blue color with a 20% in-

tensity level.

Fun:

All interior lights cycle through all colors with a 100% in-

tensity level and speed of 5.

Glow:

All interior lights are a solid White color with a 100%

intensity level.

Joy:

All interior lights cycle through all colors with an 80% in-

tensity level and speed of 3.