48
To set the time and date:
Tap
to program the time.
Slide your finger up and down to roll the time scroll wheels to
adjust the time. The “am” and “pm” will adjust according as
the time is changed.
Tap
to program the date.
Slide your finger up and down to roll the date scroll wheels to
adjust the date. Each setting for month, day and year can be
set independently. The default time setting is a 12-hour confi-
guration. To choose the 24-hour configuration, then tap, (
)
to change the setting.
Tap
to save and accept the changes.
Programming the Language
From the “Settings” menu, tap (
)
next to “Language” to en-
ter the language options.
Indicates that the feature is active.
Indicates that the
feature is not active.
There are 4 languages to select from: English, French, Deut-
sch,and Spanish. To view the selections, use the scroll wheel
to move up and down. To select a language, tap (
)
next to
the language you want to display.
Wi-Fi Setup
Connecting to your home Wi-Fi network. From the “Settings”
menu, tap (
)
next to “Wi-Fi” to enter the programming op-
tions. Make sure you have downloaded the Wi-Fi App for this
setup.
You need to follow the instructions from the App in order to
connect the Wi-Fi.
While the system attempts to connect you will see the, “Spa
Wi-Fi Setup in-progress”. When the connection is done the di-
splay will read, “Spa Wi-Fi Setup Connection Success”.
If the Wi-Fi connection setting should need to be updated or
connected to new router, follow the steps below.
From the “Settings” menu, tap (
)
next to “Wi-Fi” to enter
the menu.
Tap
. The display will change to “Spa Wi-Fi Setup In-
progress” and the reset button will be highlighted in orange.
Tap
again. This will clear the current data and allow
the spa to connect to the need data.
Reconfigure and setup your spa by following the instructions
from the app.
Spa maintenance
Proper and regular maintenance of your spa will help it retain
its beauty and performance. Your authorized Jacuzzi dealer
can supply you with all the information, supplies, and acces-
sory products you will need to accomplish this.
Information regarding spa cleaning and maintenance and
the products to be used can be found in the catalogue-
guide provided with the product.
I
Cleaning the Filter Cartridges
A reminder message appears on the control panel display after
a specified number days to remind you to clean the skimmer fil-
ter and to check the polishing bag filter. This reminder must be
reset at each filter cleaning interval. Refer to Section “Water
Care Programming” for additional information and program-
ming details. Your new spa is equipped with an advanced 2-
Stage filtration system. Fine debris are filtered by the circula-
tion pump drawing water through the ProClarity™/ProClear™
skimmer and pleated filter cartridges 8 hours (unless pro-
grammed otherwise). Large debris are filtered when jets pump
>
24
>
>
It’s time to clean or replace your ProClarity
and ProClear filters. Contact your autho-
rized dealer if new filters are needed.
Reminder
reset
snooze
Reset?
Reset?
WiFi Connect
Spa Wi-Fi Setup
Successfully Connected
reset?
Water Care
WiFi
Heat & Filter
SETTINGS
>
>
>
WiFi Connect
Spa Wi-Fi Setup
In-progress
reset?
LANGUAGE
English
French
Deutsch
LANGUAGE
Spanish
LANGUAGE
English
French
Deutsch
Time & Date
Language
Lock
SETTINGS
>
>
>
Set
Date
Time & Date
6:45p
Time
Set
1 26 2015
Date
24
01/01/2015
Time
Time & Date
Language
Lock
SETTINGS
>
>
>
Time & Date
Time
Set
8 00
Date
pm
24
6:45p
01/01/2015