17
INSTALLATION MANUAL
7.6
COLOR LIGHTS
iNSTALL SeTTiNgS > COLOr LigHTS
NOTE
You will only see this option if colored lights are
installed in your system.
Select type of light installed (e.g., JandyColors
TM
or
Jandy
®
LED Light
) and assign the light to an available
auxiliary relay.
Select Light Type:
SELECT LIGHT
Jandy Color
Jandy LED
More
INSTALL SETTINGS
Color Lights
>
Label Aux
>
Temp Calibrate
>
Solar Priority
>
Assign JVA
>
>
Assign Selected Light to an Auxiliary:
SELECT LIGHT
Jandy Color
Jandy LED
ASSIGN TO AUX
Jandy Color
Aux1
JC
Aux2
Aux3
SELECT LIGHT
Jandy Color
Jandy LED
ASSIGN TO AUX
Jandy Color
Aux1
JC
Aux2
Aux3
• JC is displayed next to AUX if a JandyColors light
has been assigned.
• JL is displayed next to AUX if a Jandy LED Light has
been assigned.
• Press Select button with JC or JL highlighted to
toggle control by the auxiliary on or off.
7.7
LABEL AUXILIARY FUNCTIONS
iNSTALL SeTTiNgS>LABeL AuX
Assign labels to auxiliary equipment to display text in
the user interface instead of AUX 1, 2, or 3.
LABEL AUX
Aux1
>
Aux2
>
Aux3
>
Label = Aux2
<Default>
Aerator
Air Blower
Backwash
Chlorinator
More
Label = Aux2
Swim Jet
Valve(s)
Wtr Feature
Waterfalls
Whirlpool
More
More
INSTALL SETTINGS
Color Lights
>
Label Aux
>
Temp Calibrate
>
Solar Priority
>
Assign JVA
>
>
LABEL AUX
Aux1
>
Aux2
>
Aux3
>
Label = Aux2
<Default>
Aerator
Air Blower
Backwash
Chlorinator
More
Label = Aux2
Swim Jet
Valve(s)
Wtr Feature
Waterfalls
Whirlpool
More
More
INSTALL SETTINGS
Color Lights
>
Label Aux
>
Temp Calibrate
>
Solar Priority
>
Assign JVA
>
>
LABEL AUX
Aux1
>
Aux2
>
Aux3
>
Label = Aux2
<Default>
Aerator
Air Blower
Backwash
Chlorinator
More
Label = Aux2
Swim Jet
Valve(s)
Wtr Feature
Waterfalls
Whirlpool
More
More
INSTALL SETTINGS
Color Lights
>
Label Aux
>
Temp Calibrate
>
Solar Priority
>
Assign JVA
>
>
LABEL AUX
Aux1
>
Aux2
>
Aux3
>
Label = Aux2
<Default>
Aerator
Air Blower
Backwash
Chlorinator
More
Label = Aux2
Swim Jet
Valve(s)
Wtr Feature
Waterfalls
Whirlpool
More
More
INSTALL SETTINGS
Color Lights
>
Label Aux
>
Temp Calibrate
>
Solar Priority
>
Assign JVA
>
>
A-Z
• Choose from labels listed A-Z on each screen.
NOTE
“SPILLOVER” assigns AUX to invoke Spillover
Mode only in JAUTPS
configurations.
7.8
TEMP CALIBRATE
iNSTALL SeTTiNgS>TeMP CALiBrATe
Adjust temperature displayed on the JAUTPS/JAUTP up
or down by 4 degrees.
NOTE
:
If the temperature is off by more than four (4)
degrees, contact your local service representa-
tive.
Select
Back
Select
Back
TEMPERATURE
CALIBRATE
Water: 74°F
More
SYSTEM SETUP
Label Aux
>
Temp Calibrate
>
Solar Priority
>
Assign JVA
>
Color Light
>
Select
Back
Select
Back
TEMPERATURE
CALIBRATE
Water: 74°F
More
SYSTEM SETUP
Label Aux
>
Temp Calibrate
>
Solar Priority
>
Assign JVA
>
Color Light
>
• Use Up/Down arrows to set new temperature value.
