E
N
G
L
IS
H
UNDERMOUNT INSTALLATION INSTRUCTIONS
Position the counter on top of the bath to ensure correct fit and
appearance. Make any adjustments that may be necessary.
Remove the counter.
BATH
COUNTER
Adhering Counter to Bath
Clean any dirt or debris from the bath rim. Do not use abrasive
cleaners.
Where the counter will make contact with top of the bath rim,
apply a bead of silicone sealant.
CAUTION: Do not use an adhesive or adhesive sealant to
secure the counter to the bath rim. If maintenance or
remodelling is required the counter may have to be
removed. Adhesive will permanently bond the counter to
the bath. This will make removal difficult and costly and
may cause damage to the counter or bath.
APPLY SILICONE
SEALANT TO TOP
OF BATH RIM
Carefully position the counter onto the bath rim. The counter
will need to be held in place while the sealant cures. Follow
the manufacturer's instructions to determine time required for
curing.
BATH
COUNTER
APPLY SILICONE SEALANT
WEIGHTS
Apply a continuous bead of silicone sealant around the entire
seam between the counter and bath rim. Allow sealant to skin
over or cure before cleaning the counter or bath.
24
Jacuzzi Whirlpool Bath K272000AF 7/06