E
N
G
L
IS
H
Controlling Whirlpool Action
The whirlpool action in your bath is influenced by three factors –
direction of flow, force of water, and force of air. Every bath manufac-
tured by Jacuzzi Whirlpool Bath that is equipped with fully adjustable
PowerPro
®
jets, are manually adjustable for direction and water force.
Some baths have additional jets which can be adjusted for direction
only.
Direction:
To change the direction of the water flow, swivel the
jet nozzle to the desired angle. The jets can be directed individually
toward any location on your body to provide a hydromassage. The
jets can also be adjusted so that they all point in the same direction
(clockwise or counterclockwise) to circulate the water in a circular
motion around the bath, causing a total whirlpool effect.
Water Force:
The high volume, fully adjustable jets can be ad-
justed to control the force of the water coming into the bath. For
robust action, increase the force of the flow by rotating the jet handles
to the left (counterclockwise). For a more gentle effect, rotate the
handles to the right (clockwise).
Never run the whirlpool system
with all the jets closed.
Force of Air:
The intensity of the hydromassage whirlpool ac-
tion is determined by the air inducted into the water. On the Magic
Touch
®
control system only: Fully opening the jets allows an equal
amount of air inducted into the water. Decrease the air flow at one
or more jets to increase the air flow for remaining jets.
Never run
the whirlpool system with all the jets closed.
DIRECTIONALLY
ADJUSTABLE
FULLY
ADJUSTABLE
JETS
26
Jacuzzi Whirlpool Bath K272000AF 7/06
OPERATING INSTRUCTIONS
W
HIR
L P OO
L
DEPRESS CENTER ON/OFF
WHIRLPOOL ON/OFF SWITCH
ON/OFF
Magic Touch
®
Whirlpool Switch
The Magic Touch Whirlpool ON/OFF switch, conveniently located
on the bath, allows you to turn the whirlpool system ON and OFF
while in the bath. Simply push down on the switch button to turn on
the whirlpool system. To turn the system OFF, push down on the
button again.
Electronic Control Switch
The Electronic Control ON/OFF Switch, conveniently located on
the bath, allows you to turn the whirlpool system ON and OFF while
in the bath. Simply push down on the switch button to turn ON the
whirlpool system. To turn the system OFF, push down on the button
again.
The Electronic Control Switch will automatically shut OFF after
20 minutes. Push down on the switch button to restart the whirlpool
system again.
TURN CLOCKWISE TO
REDUCE AIR FLOW
TURN COUNTER-CLOCKWISE
TO INCREASE AIR FLOW
AIR INDUCTION CONTROLS
Magic Touch
®
controls only