ENGLISH
22
Jacuzzi Whirlpool Bath K339000X 3/06
RapidHeat
TM
These units have a RapidHeat
TM
heater installed on the intake or discharge lines.
The
heater will help maintain the temperature of the water in the bath.
Operation
With the heater installed and the whirlpool pump is operating, the heating func-
tion is totally automatic. No user control required.
Vacuum/Pressure Switch
The heater is equipped with a preset vacuum/pressure switch which will not al-
low the heater to turn ON if the pump is not running with water flowing through the whirlpool system.
High-Limit Switch
The heater includes an exclusive High-Limit switch. This safety circuit will not false trip from hot tap water. It will only turn off
the heater if the thermostat fails. To reset, press the button. If the high-limit trips frequently, contact your Authorized Electrical/
Mechanical Service Provider. Visit our web site at
http://www.jacuzzi.com/.
To find service agent listings for:
Electrical or Mechanical Repairs visit
http://jacuzzi.com/pdf/ASA.PDF
Finish, Surface, or Shell-Related Repairs visit
http://jacuzzi.com/pdf/AFC.PDF
Repair Parts or Accessories visit
http://jacuzzi.com/pdf/MPD.PDF
PUSH TO RESET
OVER HEAT
PROTECTION
HIGH LIMIT RESET
HEATER ON
HEATER ON
OPERATING INSTRUCTIONS (cont'd)
