Signa® 6 Whirlpool Bath
Model: B540, B460
Signa® 6 Bath
Model: C100
Installation Notes
Refer to installation instructions included with fi xture before beginning installation.
Please confi rm product availability and specifi cations before commencing with any
installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE
WITHOUT NOTICE.
Electrical Components and Electrical Specifi cations do not apply to non-jetted baths.
Ordering Information
Product Code:
B540 Signa® 6 Whirlpool Bath
Left Hand
B460 Signa® 6 Whirlpool Bath
Right Hand
C100 Signa® 6 Bath
• Center Drain Location
• Accessories / Hardware:
Trip-Lever Drain Kit #X559
Rotary Trip-Lever Drain Kit: #K606
TheraPro™ Jet Rings Kit: #D095
AccuPro™ Jet Rings Kit: #P556
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(849) – Oil Rubbed Bronze
Technical Specifi cations
Dimensions
72” L x 42” W x 22” H
(1829 mm) L x (1067 mm) W x (559 mm) H
Drain/Overfl ow
A: 16-7/8” (429 mm) B: 14” (356 mm)
Cutout
70” x 40”
Total Weight
B540, B460: 826 lb (375 kg) / 39 lb/sq. ft. (192 kg/m
2
)
C100: 781 lb (354 kg) / 37 lb/sq. ft. (180 kg/m
2
)
Operating Gallonage
55 U.S. Gal. (208 Liters)
Max. 103 U.S. Gal. (390 Liters)
Product Weight
B540, B460: 118 lb (54 kg)
C100: 73 lb (33 kg)
Skirt Mounting
Not Available
Electrical Specifi cations
Models B540, B460 only
Requires a dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 15 AMP, 60 Hz.
RapidHeat™: 120 VAC, 15 AMP, 60 Hz.
Heater (Optional)
Models B540, B460 only
Requires a dedicated GFCI protected separate circuit.
RapidHeat™: P/N S750000
12-1/2"
36"
11-1/4"
5"
42"
*72"
18-1/2" x 5"
Motor
12" H x 18" L
Service Access
Opt.
Service
Access
© Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino • CA • 91710 • www.jacuzzi.com
END VIEW
H
W
SIDE VIEW
L
2"
#FS20 06/07
DRAIN/OVERFLOW
A
B
Product Shown: Signa® 6 Whirlpool Bath Right Hand Model: B460
* Measurements inside unit represent cutout in fl oor to allow for drain/overfl ow.
Minimum Service Access dimensions given.
