background image

Jacuzzi Whirlpool Bath
C/O AMEREC
P.O. Box 2258
Woodinville WA, 98072

Jacuzzi Whirlpool Bath, warrants that its Steam Generators (warranted products) are free of manufacturing defects
both as to workmanship and material for 5 years and it will replace or repair defective parts or equipment for the period
of time and in accordance with the conditions set forth below. The terms of the warranty will be administered by
Saunatec Inc. dba, AMEREC.

1. Applicability.  This warranty applies when the warranted product (a) is installed in accordance with installation
instructions provided, (b) is properly and reasonably maintained, and (c) has not been subjected to damage, misuse,
or abuse.

2. Registration.  This warranty becomes valid only after the Limited Warranty Registration form, provided with this
warranty, is completely filled in and signed by the original purchaser and mailed to AMEREC within sixty (60) days from
the date of original installation. This warranty is nontransferable and shall extend only to the original purchaser.

3. Duration of Warranty.  AMEREC or it’s authorized representative will provide parts to replace those with
manufacturing or workmanship defects for a period of five (5) years from the date of original installation, except when
the warranted product is installed in commercial locations such as clubs, condominiums, apartments, spas or military
facilities.  In commercial locations, AMEREC or its authorized representative will provide parts to replace those with
manufacturing or workmanship defects for a period of one (1) year from the date of original installation.  Additionally,
for noncommercial locations in the United States AMEREC or its authorized representative will provide reasonable
labor to replace defective parts for a period of two (2) years from the date of original installation and three
(3) additional years if the product is returned to the factory.

4. Warranty Work.  All warranty work must be (a) authorized by AMEREC before it is performed; and (b) performed
only by authorized AMEREC representatives.  This warranty shall not apply to any charges for parts or labor incurred
before receiving approval by AMEREC.

5. Return Authorization Number.  A return authorization number assigned by an AMEREC representative must
accompany all returned parts.  Parts which are returned without a return authorization number may not be repaired
or replaced.

Jacuzzi Whirlpool Bath Limited Warranty

Steam Generator  Products

Summary of Contents for Steam & Shower Base SEDONA





















Reviews: