22
11.
Turn off power to the swim spa at the circuit breaker, then drain the swim spa as out-
lined in Sec on 13.2.
12.
Refill the swim spa with clean tap water from the garden hose un l water covers all jets
but does not touch the bo om of the lowest headrest with all headrests in their lowest
posi on (DO NOT OVERFILL!)
CAUTION:
TO DECREASE BUILD UP ON COMPONENTS AND MINIMIZE ACRYLIC DAMAGE!
Never fill with water from a water so ener. If your water is extremely “hard”, it is
preferable to fill half way with hard water and the rest of the way with so ened wa-
ter. Water that is too so can be corrosive to metal components.
13.
Consult your authorized Jacuzzi dealer for chemical recommenda ons, then add chemi-
cals to swim spa water to achieve a constant sani zer reading within the levels recom-
mended on the inside cover of this manual.
14. Turn on jet pumps when adding chemicals to ensure proper mixing and leave your swim
spa cover open un l the sani zer level becomes stable to protect pillows and plas c
knobs from chemical a ack. Refer to the inside cover of this manual.
WARNING
: RISK OF PERSONAL INJURY!
To decrease the risk of injury, drowning or entrapment, never leave your swim spa un-
a ended for any reason while the cover is open and accessible, especially to small chil-
dren and animals.
To decrease the possibility of contrac ng a waterborne illness (e.g. an infec on, bacteria
or virus) and/or respiratory ailments, maintain water chemistry within step 6 parame-
ters. If you or other bathers experience such a condi on, discon nue use and seek medi-
cal a en on.
