background image

The Tirage Plus  Portable Whirlpool Spa

Specifications and Installation Instructions

The Tirage Plus also features a clearly labeled control

panel concealed by a streamlined, tinted acrylic cover.
Push button controls give you convenient command of
the heater, filter, whirlpool, lights, and air blower func-
tions.  Two control panels having knobs for adjustment
of the silent air induction are located on the rim of the
spa.  A 7-day timer (located on the System Control
Module) can be set for automatic control of temperature
and filtration.  The Tirage Plus also features two low
voltage underwater lights and interchangeable colored
lenses, adding even more luxury and excitement to your
spa experience.

Under this same tinted cover is a dry compartment in

which to store personal items such as eye glasses, or
watches, etc. The Tirage offers the convenience of two
patented front-load skimmer/filters for maximum effi-
ciency.  The unique 50 sq. ft. filtration system, designed
by Jacuzzi Whirlpool Bath, allows easy access from
inside the spa to both filter cartridges without having to
drain the spa or open the skirt door.

A standard feature of the Tirage Plus is its two Water

Rainbow™ spouts with flow control, which will create a
dazzling, shimmering waterfall effect while recirculating
the water.

The spa shell is foam-insulated to save energy costs,

and the spa is tastefully surrounded by a factory installed
redwood skirt.

The complete equipment pack of the Tirage Plus is

mounted within the perimeter of the spa, so the spa is
easy to install. The spa requires a 230 VAC 50 AMP 4-
wire grounded, separate circuit and is equipped with a
ground fault circuit interrupter (GFCI).  An optional gas
heater is available as an alternate heating source and
can be installed remotely.  The Tirage Plud is available
in a wide range of lustrous acrylic colors.  (See the
Jacuzzi Whirlpool Bath color guide.)

The Tirage Plus™ is a sumptuous rectangular whirlpool spa by Jacuzzi

  

 Whirlpool Bath  designed with  full-featured

elegance to provide the comfort and luxurious spa experience you expect from a Jacuzzi

®

 whirlpool spa.  Its multi-level

contours and individualized, connecting loungers allow seating for 7 people.  Entry and exit from the spa are made
easier and safer by the built-in exterior and interior steps.  And for a revitalizing hydromassage, seven fully adjustable
color coordinated PowerPro™ whirlpool jets and one directionally adjustable jet are located strategically to massage
lumbar and upper back regions, depending on where you are seated.  The two sets of stacked jets ensure this
simultaneous hydrotherapy.

OPTIONS

Gas Heater
Rigid Insulating Cover
Pillow

ARCHITECTURAL SPECIFICATIONS

(Short Form)

Whirlpool spa shall be the Tirage  whirlpool spa as

manufactured by Jacuzzi Whirlpool Bath in colors and
sizes shown in drawings and schedules.

2.0 HP
230 VAC
10 AMPS
3450 RPM
Single Phase
60 Hz.

WHIRLPOOL
MOTOR/
PUMP

SHIPPING
WEIGHT

FLOOR
LOADING

FILTER
MOTOR/
PUMP

OPERATING
GALLONAGE

Tirage
Plus

8900000

375 US Gal.
(1419 Ltrs.)

94" L. (238.8 cm)
87" W. (221 cm)
37" H. (94 cm)

86 lbs./sq. ft.
(384 kg./sq. m.)
Total Weight:
4874 lbs.
(2216 kg.)

ELECTRIC
HEATER

6 Kw
26 AMPS

1100 lbs.
(500 kg.)

PRODUCT SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE

ELECTRICAL
REQUIREMENTS

MODEL

230 VAC
50 AMPS
60 Hz.
Separate Circuit
4 Wire

.75 HP
230 VAC
4.8 AMPS
3450 RPM
Single Phase
60 Hz.

DIMENSIONS

SPECIFICATIONS

TM

1

94"

87"

37"

SERIAL NUMBER
LOCATION

Summary of Contents for Tirage Plus 8900000
























Reviews: