Silent Air Induction
The intensity of the whirlpool action is determined by
how much air is inducted into the water. You have
control of this by adjusting the air induction control knobs
located on both control panels. For maximum air induc-
tion, rotate each control knob fully counter clockwise to
the largest circle. For fewer air bubbles, decrease the
amount of air induction by rotating the control knob
clockwise. When the knobs are turned to the smallest
circles, only water is being circulated.
10
Water Rainbow
™
Spout
The Water Rainbow spout will add the soothing sound
of a waterfall to your bathing pleasure, as well as provide
beautiful cascades of shimmering water for an exciting
visual effect.
Activate the waterfall feature by first turning on the
JETS, HTR/FLTR, or FILTER function, then rotate down-
ward the flow control lever located on the left side of the
spout. Use this lever to adjust the amount of water
flowing through the Water Rainbow spout. The waterfall
effect will be greatest in the JETS mode. Turning off the
flow at the fully adjustable jets will dramatically increase
Water Rainbow flow.
CAUTION:
The water circulating through the Water
Rainbow spout is not fresh water and therefore is
not suitable for drinking.
Air Blower
The Tirage features a built-in air blower and factory
drilled air holes in the seats of the spa to add to your
enjoyment. The blower sends air to a channel located
under the spa's seats; this air is distributed through the
air holes, forming tiny bubbles which travel upward until
they reach the surface and burst. The exciting visual
effect of the bursting bubbles contributes to the overall
hydromassage experience.
Activate the blower by pushing the ACCESSORY
switch. (Note that the filter pump will also come on
at this time.)
Filtration
When you are ready to leave the spa, push the
SYSTEM switch button to turn off the whirlpool. Then
select the HTR/FLTR mode. Adjust the HEATER knob
to the temperature at which you wish the water main-
tained. In this way, the water will be filtered when the
heater goes on to maintain the temperature. Whenever
the water temperature reaches the desired temperature,
the pump will turn off.
For continuous filtration, select FILTER on the SYS-
TEM switch. In this mode, the filter pump will run until it
is manually deactivated while maintaining the water
temperature selected by the HEATER KNOB. Set the
HEATER KNOB to its lowest setting unless you wish the
higher temperature to be maintained. Running the filter
pump for at least two hours per day is sufficient.
Another way to be sure the water will be filtered is to
turn the SYSTEM off and set the built-in timer in the
System Control Module to turn the system on at a certain
time to filter the water. Be sure there is sufficient water
in the spa (filled to the water line indicator mark on the
skimmer/filter frame) when the timer is set, or the spa’s
motor/pump could be damaged. (See page 7 for instruc-
tions on setting the timer.)
HIGH VOLUME FULLY
ADJUSTABLE WHIRLPOOL JET
OPERATION
Normal Operation
Whirlpool System
You can enjoy your spa with or without activating the
whirlpool. Either way, bathing in your spa can be
pleasurable, as well as therapeutic.
For an invigorating spa experience, you can take
advantage of the built-in whirlpool system. To do this,
push the SYSTEM switch button to select the JETS
mode. Sit or recline in the spa so you are comfortable.
The fully adjustable whirlpool jet located on the wall
opposite the control panel can be adjusted to control the
force of the water coming into the spa. For stimulating
action, increase the force of the flow by rotating the jet
handle to the left. For a more relaxing effect, rotate the
handle to the right (clockwise). The directionally adjust-
able whirlpool jets can be directed toward any location
on the body, particularly toward any area that feels tense
or stiff. The warmth of the water and the stimulating
water flow from the jet will pleasantly increase circula-
tion.
Or, for the total whirlpool effect and all-over feeling of
well-being, you can adjust all jets so they point in a
clockwise or counter-clockwise direction to circulate the
air and water mixture in a circular motion all about the
spa.
Finally, after a busy, stressful day, you can look
forward to soaking in your spa in still water with no
turbulence-only the gentle warmth of the soothing and
relaxing water.
