8
SPECIFICATION
Power voltage
220V-240V 50-60Hz 1650W
Water Supply
Water input
Connect to the water pipe directly
Water pressure
0.08
MPa - 0.75
MPa (0.8
kgt/cm² - 7.5
kgt/cm²)
Wash device
Rear wash water volume
0.5
L/min - 0.9
L/min
Front wash water volume
0.5
L/min - 0.9
L/min
Tank volume
1
L
Temperature
Room temp./Low 33°C/Medium 37°C/High 40°C
Heating power
1600W
Safety device
Floating switch / Temperature fuse / Water level sensor
Heated seat
Temperature
Room temp./Low 30°C/Medium 35°C/High 40°C
Heating power
40W
Safety device
Temperature fuse
Warm air
dryer
Temperature
Room temp./Low 35°C/Medium 40°C/High 45°C
Heating power
200W
Safety device
Temperature fuse
Other safety device
Earth leakage protector
Power cord length
1.5
m
Net weight
46
kg
NOTE:
1. Please stop the water supply if the power suddenly turns off in the process of using. The product will
run self-checking system and recover after power turns back on.
2. Please use our special angle valve and other accessories.
Phenomenon
Inspection Method
Solution
Fail to run
Power failure or forget to
switch on
Confirm the power is on
Reconnect the power
The nozzle does
not spray or the
water does not
flow smoothly
Water supply failure or water
tap shut off
Check the water supply and turn on the valve
Filter mesh is jammed
Check the filter mesh
Water outlet is jammed by
limescale
Clean the nozzle with toothbrush
Water leakage
Connection parts not tight
Tighten connection
Low temperature
for water or seat
Temperature not set
Reset the temperature
