LGCN
6
5. Operation
5-1 Basic Weighing
5-1-1 Weighing
Begin with no load on the scale, the display reading zero .
Place item(s) to be weighed on the scale. The display
shown is 1000.0g, gross weight.
5-1-2 Tare & Preset Tare
Tare
When weighing a sample that must be held in a container, taring stores the container weight
into memory.
Under the weighing mode, place the container on the
scale, weight window shown is 500.0g. Press the Key
to complete tare action.
“NET”
and
“TARE”
indicator turns on .
2) To clear tare, with an empty pan, Press down the
key
or key
.
Preset Tare
1) Under the unload condition , Enter tare value using
the Numeric keys together with key
, then press
key
. The weight window displays the tare value.
2) Put the load on the container, the scale will automatically deduct the value of the container
from the total value.
Note: during the process of Tare or Preset Tare, if the load and container are not removed,
press zero to check the gross weight.
Summary of Contents for LGCN-3075
Page 15: ...LGCN 14...
Page 16: ...LGCN 15...
