Page 4
WEIGHING SCALE
Cross reference list of keys in Chinese and English
中文
開關
扣重
歸零
列印
轉換
單位
ENGLISH
ON/
OFF
TARE
ZERO
MODE
VI. FUNCTION SETTING
LCD Display
Function
Selection
Reference
CAL
Model display
Page 4, Item 1
↓
UON
Weighing unit
ON/OFF
Page 5, Item 2
↓
Init
Initial unit
Kg/g/lb/lb-oz/Taiwan jin/HK
jin, etc.
Page 5, Item 3
↓
Fil
Filter
1/2/3/4
Page 5, Item 4
↓
Auto
Auto power off
OFF/5/10/30/60
Page 5, Item 5
↓
Ligh
Backlight
OFF/ON/AUT
Page 5, Item 6
↓
Lit
Zero point range
0/1/2/3/4/5
Page 5, Item 7
↓
Baud
RS-232 baud rate
2400/4800/9600
Page 5, Item 8
↓
rS232
Printing mode
Co/St/ Pr
Page 5, Item 9
↓
External device
PC /SH/EZ
Page 5, Item 10
↓
Stabl
Printing stability
Yes/No
Page 5, Item 11
1.
Power on while holding down MODE key. The scale will enter into function setting mode and
CAL
appears on the LCD display. Press PRINT key, the LCD display will show the scale model e.g.
3 kg
.
2.
Press MODE key once again, the LCD display will show
UON
, which means the scale enters
into weighing unit setting mode. Press PRINT key to select unit, press TARE key to enable (ON) or
disable (OFF) the weighing unit. If the display shows
ON kg
, it means the unit shown will be
used;
OFF kg
means the unit shown will not be used. Press MODE key once again, the LCD display
will show
Init
,which means the scale enters into initial weighing unit setting mode; press
TARE key to select initial unit setting.
3.
If the LCD display shows
Init g
, it means “g” is the initial weighing unit when power on.
Available units: kg, g, lb, lb-oz, jin, HK jin, Taiwan jin.
