ROUGH-IN DIMENSIONS
2-1/8" MIN.
REF. DIM.
2-5/16" D.
2-7/8" MAX.
1 0 9 5 9 0
1 0 9 5 9 0
Plumbers' Putty or Caulking
Adjustable Wrench
Phillips Screwdriver
TOOLS REQUIRED
Regular Screwdriver
CAUTION
Turn off hot and cold water
supplies before beginning.
CAUTION
Turn off hot and cold water
supplies before beginning.
1
INSTALL CROSS HANDLE
1/2" NPT VALVE
3/2" NPT VALVE
With VALVE in off position align CROSS HANDLE (5) as shown or as desired. Install CROSS HANDLE (5) onto
VALVE STEM (2) and tighten HANDLE SCREW (6). Thread INDEX (7) into CROSS HANDLE (5).
Apply sealant to groove on back side of ESCUTCHEON (4). Slide ESCUTCHEON (4) onto BARREL SLEEVE (1).
Install BARREL SLEEVE (1) over VALVE STEM (2) and thread onto VALVE (3) until it seats tight against
the internal stop.
Slide ESCUTCHEON (4) flush against finished wall to cover wall opening.
Apply sealant to groove on back side of ESCUTCHEON (4). Slide ESCUTCHEON (4) onto BARREL SLEEVE (1).
Install BARREL SLEEVE (1) over VALVE STEM (2) and thread onto VALVE (3) until it seats tight against
the internal stop.
Slide ESCUTCHEON (4) flush against finished wall to cover wall opening.
7
6
5
4
1
4
1
2
3
2
INSTALL LEVER HANDLE
For Lever Handles:
Install FRICTION WASHER (5) onto base of LEVER HANDLE (6). With VALVE in off position
align LEVER HANDLE (6) as shown or as desired. Install LEVER HANDLE (6) onto VALVE STEM (2) and tighten
SET SCREW (7) with HEX WRENCH (8) supplied.
LEVER HANDLE OPTIONS
5
6
2
3
8
7
2-3/8" MIN.
REF. DIM.
3-1/8" MAX.
LEVER HANDLE OPTIONS
2-5/16" D.
SEALANT
SEALANT
