35
Once the spring has been released, take out
the bar, and pull the wristlet section towards
you to extract it.
Insert one end of the bar into the hole in the
horn of the case, and hold it fi rmly.
Take the tool supplied, and position it on the
free retractable end of the bar. Holding the
tool in this position, press sideways (from
the opposite side of the horn) to push the
spring back inside the bar.
Move the retracted bar to over the hous-
ing hole in the horn, and release it so as to
engage the spring.
Refi tting the wristlet
Make sure that the wristlet is properly fi tted by pulling gently on the section.
English
