Make sure to insert SD card in the right way.
The function is able to be changed for firmware upgrade or product enhancement without prior notice, please visit website regulary.
9. INSTALLATION
10
15
10
10
20
20
15
15
10
10
10
15
10
15
10
10
20
VCC
Push the SD card into the memory card slot until you hear clack sound.
When using memory card for the first time /
When the memory card is reused after format.
The system will be in standby mode for 3~5 minutes to create
system files and checking the memory card.
Recording starts with voice guide saying "Start Recording".
Connect external GPS to the GPS slot of the top.
It provides vehicle speed, location and other
additional information if connect external GPS.
Please make sure to have some distance
between main product and GPS.
Product Installation
Connect External GPS.
Inserting SD Memory Card
GPS
4. Connect power cable to DC-IN slot.
5. Other side of cable connect to vehicle fuse or cigar jack cable.
In order to install uninterrupted power cable,
refer to the webiste www.iroadkr.com or look at this instrcution page 10.
6. Make sure that the product is operating normally.
7. Clean up the power cable and rear camera wiring
with cable holder or using edge part of vehicle.