THE ADAPTER MUST BE UNPLUGGED BEFORE ANY MACHINE MAINTENANCE OPERATION.
CARE & MAINTENANCE
REPLACEMENT FILTERS
1. CLEANING THE BODY OF THE DEVICE (RECOMMENDED ONCE A MONTH):
1) Use a soft cloth to remove stains.
2) Stubborn stains that are not easy to clean can be wiped off with a soft cloth dipped in an
appropriate amount of neutral detergent.
Note: do not use hard objects to scratch the machine shell. When removing the base,
follow the instructions to avoid damaging machine parts.
2. FILTER CLEANING AND REPLACEMENT (RECOMMENDED ONCE EVERY 3-6 MONTHS):
1) Filter replacement will be reminded by the built-in program, which can be replaced
according to the service life of the machine, or can be replaced in real time by the
filter‘s mandatory service life reset function.
* The filter's life is is about 3000 hours, and the 5 indicator lights will decrease by one every
600 hours. When the filter’s remaining life is lower than 150 hours, the filter button will turn
red, and the last indicator light will start flashing (1Hz) to warn the filter screen needs to be
replaced.
When this happens, replace the filter and press the filter button to reset the filter's life
indicator.
Filter life reset:
When the filter life is ≥150 hours, touching the filter’s life
reset button (3s) will not reset the
filter’s life, but only a emit a"ding" sound. When the filter life is <150 hours, the filter’s life reset
button will turn red: long press the filter’s life reset button (3s).A "ding" sound will confirm the
filter’s life is reset, . The filter’s life reset is completed, and the indicator light of the filter
life is fully on.
Mandatory reset of filter life:
Within 30 seconds after power-on, in the standby mode, long press the filter reset button
(more than 3s). A a "ding" sound will indicate that the filter life is forced to reset, , and the
screen will flash 6 times (2 times/second), indicating that the mandatory reset action has
been completed. Reboot, and the filter’s life indicator light turn back on.
2) when dust accumulates on the surface of the composite filter, you can use a vacuum
cleaner to clean the surface dust, in order to extend the service life of the filter (it is
recommended to clean once a month. Do not wash).
* Depending on the machine’s environment, the filter’s life will be different. For example, in
places where people smoke and pets are present, the life of the screen is shorter. When the
purification effect is not good, replace the filter in time.
* Please dispose the used waste filters according to the relevant regulations of solid waste.
1
2
3
4
5
6
7
8
9
1. When the filter button
has a red light and the
remaining light of the
filter’s life indicator on the
display screen starts
flashing, the filter needs to
be replaced.
2. Touch the POWER
button to turn off the
machine and unplug the
adapter.
3. Turn the product
upside down and open
the knob on the base to
the open position
according to the
product label.
4. Remove the base.
5. Remove the used
filter screen from the
machine.
6. Remove the packing
plastic bags of the new
filters
.
7. Put the new filters into the
machine.
8. Cover the base and
tighten the knob to the
locking position in the
marked direction.
9. Plug in the adapter and
touch the POWER button
to restart it.
9
10
