Aerográficos GAHE, S.A.
Page
9
Ref. Manual: 810603013 (rev. 2)
PRIMA 100 Tolva
-
USER AND MAINTENANCE GUIDE
Aerográficos GAHE, S.A.
Page
8
Ref. Manual: 810603013 (rev. 2)
11. MIANTENANCE
The ordinary maintenance of the gun is very simple as it does not require any special operation. To ensure the
proper functioning, you only have to clean the paint circuit after finishing the activity.
A recommendation for the product to last longer is to use well filtered paints and avoid paints which block the
nozzle easily.
CLEANING:
1. Substitute the paint by solvent.
2. Regulate the minimum working pressure (regulate the air at 1 bar -14 psi)
.
3. Pull the trigger until the whole circuit is completely clean.
4. Disconnect from the compressed air.
5. Clean the air nozzle with a cloth and a brush.
6. Clean the body of the gun with a cloth.
7. Lubricate all the moving parts.
NOTES:
o
Always use the gun in a perpendicular position to the area to be painted.
o
Avoid working only with a wrist movement.
o
Do not forget that cross coats do not cover regularly.
o
Spraying with an immobile gun causes a local overload. Therefore, do not pull the trigger before
starting to move your arm, and do not release it before finishing the movement
.
o
Try to get a spraying with regular and constant thickness between the different coats.
CLEANING NOTES:
o
If the cleaning is done in an industrial washing machine for spray guns, the air and product regulator
have to be closed (so that the solvent does not damage the joints). Dry the gun with a blowing gun
once the cleaning cycle has finished.
o
Do not use metallic brushes for cleaning.
o
Never sink the gun into solvent.
