8.3.2. Hydraulic & electrical connection
208V / 60Hz
0-10V
Speed control input
GND
L
N
Red
Blue
Blue
Y
ello
w
/ Gr
een
Black or Br
o
w
n
Y
ello
w
White
NOT USED
0²⁵/₃₂
5 ¹⁹/₃₂
20 ¹⁵/₁₆
8 ²⁷/₆₄
15 ⁵/₆₄
9 ¹/₁₆
10 ¹⁵/₆₄
7 ⁷/₁₆
2 ¹⁹/₃₂
19 ⁴⁹/₆₄
12 ²¹/₆₄
11 ⁵⁷/₆₄
8.4. INSTALLATION
Mark and drill the mounting holes for the the device.
The type of wall determines which type of screw or plug must
be used.
Make sure that the wall is level and has sufficient loadbearing
capacity!
01
02
1. Place the screws of the device(5-8) and let them stick out 1
cm. Use a washer between screw head and the appliance. [1]
2. Place the device in the correct position.
3. Tighten the screws. [2]
Threaded rods: mount the unit on the threaded rods.
Use a
washer between screw head and the appliance.
The installer should provide sound dampening material.
1
2
Dimensions in Inches
Stop hydraulic
connection during
assembly
EN
17
JAGA CANADA | BRIZA 26 | MANUEL | 2022.09.27 | V.01
