![background image](http://html.mh-extra.com/html/jaga/dbh-set/dbh-set_manual_631174105.webp)
105
EN
5. SETTINGS VIA CONTROL PANEL
5.1. ADJUSTING THE WATER TEMPERATURE
The unit starts from the set temperature
/
.
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
15 sec
Setting the maximum water temperature for
cooling
By setting the temperature lower, the unit will
start later. If the water temperature is set higher,
the unit will start faster .
1. Put the device in the cooling mode
2. Hold down the [
Mode
] and [
+
] simultaneously
until the last 4 LEDs start flashing .
set minimum water temperature heating
By setting the temperature higher, the unit will
start later. If the water temperature is set lower,
the unit will start faster .
When using a heat pump, it may be necessary
to set the water temperature at a lower setting .
1. Put the device in heating mode
2. Hold down the [
Mode
] and [
+
] simultaneously
until the last 4 LEDs start flashing .
4. After 30 seconds, the new settings are automatically saved and the device returns to the selected
mode. .
3. Briefly press the [-] or [+] button to adjust the set temperature .
12 ̊C
18 ̊C
24 ̊C
14 ̊C
20 ̊C
26 ̊C
16 ̊C
22 ̊C
24 ̊C
30 ̊C
36 ̊C
26 ̊C
32 ̊C
38 ̊C
28 ̊C
34 ̊C
/
factory default water temperature
24
28
24
28