Cables / Terminal blocks for OPT-16 and TRA-16
Cables / Terminal blocks for OPT-16 and TRA-16
ADwin
224
ADwin-Pro II
Hardware, manual Dec. 2018
7.3 Cables / Terminal blocks for OPT-16 and TRA-16
7.4 Enclosure Mounting
7.5 Reference addresses
7.5.1 LEMO Connectors
Pro modules are equipped with the following LEMO connectors:
– Male connectors / female connectors of series 00 NIM-CAMAC, 1-pole
• Cable connector: Type FFS
• Built-in female connector: Type ERN
– Male connectors / female connectors of series 00 Multi-Contact, 2-pole
• Cable connector: Type FGG
• Built-in female connector: Type EGG
– Pt100/RTD-8 modules: Male connectors / female connectors of
series 0B:
• Cable connector: Type FGG
• Built-in female connector: Type EGG
Manufacturer of LEMO connectors:
7.5.2 Power Supply Pro-Mini
The plug connector for external power supply of the casing Pro-Mini is manu-
factured by Phoenix Contact GmbH:
Combicon plug component, pitch 5.0mm, Type MSTB 2,5/ 3-STF;
order no. 1786844 (as of Dec. 2005)
Manufacturer of the connector:
ADwin-Cable-1
Extension cable 1000 mm, shielded, for 37-pin DSub con-
nectors; one side female, other side male
ADwin-Cable-2
Extension cable 500 mm, shielded, for 37-pin DSub con-
nectors; one side female, other side male
ADwin-Cable-3
Extension cable 250 mm, shielded, for 37-pin DSub con-
nectors; one side female, other side male
ADwin-AT-37M
Terminal block for37-pin DSub connector
Pro-Mount
Mounting plate (to be bolted with the enclosure handles)
to attach a Pro I enclosure e.g. in a 19“ rack.
Pro II-Mount
Mounting angle (to be screwed to the enclosure side
panels) to attach a Pro II enclosure e.g. in a 19“ rack.
LEMO S.A.
Chemin de Champs-Courbes 28
P.O. Box 194
CH-1024 Ecublens, Switzerland
Tel.: +41 21 695 16 00
Fax: +41 21 695 16 01
E-Mail: info@lemo,com
Internet: www.lemo.com
Phoenix Contact GmbH & Co. KG
Flachsmarktstraße 8
D-32825 Blomberg
Tel.: +49 5235 300
Fax: +49 5235 341200
E-Mail: info@phoenixcontact.com
Internet: www.phoenixcontact.com
