Pro II: Multi-IO Modules
Pro II-MIO-4 Rev. E
ADwin
26
ADwin-Pro II
Hardware, manual Dec. 2018
The digital channels are available on a 37-pin D-Sub female connector; for pin
assignment see fig. 17.
Fig. 20 – Pro II-MIO-4 Rev. E: Block diagram of digital channels
TiCo
processor
The module provides the freely programmable
TiCo
processor with 64kiB pro-
gram memory, 64kiB data memory, and 4MiB external SRAM memory. The
internal memory serves as data and program memory. You prgram the
TiCo
processor with
TiCoBasic
.
The
TiCo
processor has access to all analog and digital input and output chan-
nels, as does the
ADwin
CPU. Find more information about use and program-
ming of the
TiCo
processor in the
TiCoBasic
manual.
If you store a
TiCoBasic
program in the
TiCo
bootloader, the program is auto-
matically loaded into the
TiCo
processor and started on power-up. Thus, the
module can run on its own and independently from the CPU module of the
ADwin-Pro II
system.
ADwin-Pro
II
bus
0
1
7
2
3
6
EVENT
Data
Register
Data
10k
10k
10k
10k
10k
10k
10k
5
4
10k
10k
