Transport and packaging
Item no. 10301166, Revision 03
6 ( 40 )
2
Transport and packaging
Example of design: Inserting the
shank
Note: Ensure functionality
u
When transporting the HF spindle, always fit an appropriate shank in the
collet.
Avoid strong vibrations or impacts during transportation, as these could dam-
age the ball bearings of the HF spindle.
Ü
Any damage reduces the accuracy of the HF spindle.
Ü
Any damage restricts the functionality of the HF spindle.
Ü
Any damage shortens the service life of the HF spindle.
2.1
Scope of supply of HF spindle
The following parts are supplied with the HF spindle:
q
High Frequency Spindle
q
Collet
q
Service set
q
Transport packaging
Ü
Check the high frequency spindle for completeness upon delivery.
2.1.1
Service set
q
Collet grease
q
Felt cleaning taper
q
Cylinder brush with eyelet
q
Ejector pin
q
O ring
q
Collet screw-in tool