English instructions for use
35
After moving the device, leave it upright for 24 hours before
switching it on again. If you have moved the device, wait 30
minutes before switching it on.
Connecting and disconnecting the mains cable
Make sure that the main switch is in position “0”.
Insert the mains plug into a properly installed socket.
To remove, pull the mains cable by the mains plug.
After moving the device, leave it upright for 24 hours before
switching it on again. If you have moved the device, wait 30
minutes before switching it on.
Switching the device on and off
To switch it on move the main switch to position “I”.
The refrigeration process begins. After approx. 30 minutes, the preset
refrigeration temperature (-18 °C) is reached.
To switch it off move the main switch to position “0”.
The refrigeration temperature is set to the default setting of
approx. -18 °C.
After switching on the device, leave it empty for at least one
hour.
After disconnecting the mains cable from the power socket, wait
at least 5 minutes before reconnecting the device to the power
supply.
Summary of Contents for FREEZE-O-MAT
