Jägermeister SHOT GLASS FREEZER, Owner'S Manual

2

INSTRUCTIONS

Unpacking and Start-Up Instructions

1.

Start by removing the included boxes of shot glasses (if applicable).

2.

Remove foam inserts to reveal the freezer.

3.

Carefully remove the freezer by lifting it straight up out of the box.

4.

Place the freezer in desired location with 4 inches of clearance  

on all sides.

5.

Before plugging in, make sure the power switch in the back 

is in  the OFF position.

6.

Plug in, and flip the power switch to ON.

7.

Place dry glasses in freezer upside down.

8.

Place non-skid rubber mat on top of the freezer with logo facing up.

Cleaning Instructions

1.

Turn off freezer and remove the trays.

2.

Wipe down the trays with disinfectant spray; return trays to freezer.

Thank you for purchasing the Jägermeister

®

 Shot Glass Freezer

In Case of Frost

It is normal for frost to appear in the freezer. To remove the layer

of frost, simply turn off the freezer and let it sit while the frost melts.

The frost will automatically drain out of the freezer. It is recommended 

you place a towel under the freezer in case of seepage.

It is normal to experience a layer of frost up to 1/8" inch thick.

ALWAYS CHECK TO MAKE SURE THE DOOR IS CLOSED FIRMLY

RETAIN YOUR ORIGINAL BOX AND PACKING 

MATERIALS FOR A PERIOD OF 1 YEAR.  

THESE ITEMS ARE NEEDED IF YOUR FREEZER 

REQUIRES SERVICE OR REPAIRS. 

For information on requesting service or repairs, visit:

www.tapmachine.com