2
INSTRUCTIONS
Unpacking and Start-Up Instructions
1.
Start by removing the included boxes of the Stag Pourer
& Bottle Neck Extender.
2.
Remove foam inserts to reveal the freezer.
3.
Carefully remove the freezer by lifting it straight up out of the box.
4.
Place the freezer in desired location with 4 inches of clearance
on all sides.
5.
Before plugging in, make sure the power switch in the back is in
the
OFF position.
6.
Plug in, then flip the power switch to ON.
7.
Take the Stag Pourer & Bottle Neck Extenders and screw on to 1L
or 750ML bottles of Jägermeister Classic, then insert the two bottles
in the cooling compartment. It is recommended that the bottles be
chilled
BEFORE inserting them inside the bottle compartment.
Cleaning Instructions
1.
Turn off freezer and remove the bottles.
2.
Using a damp cloth or paper towel, insert hand inside the bottle
compartment to clean or wipe up any spillage.
PLEASE NOTE: Although the machine is equipped with an automatic
defrost mechanism, you may notice build-up of ice in the cooling
compartment when the relative humidity is high. If the ice build-up
becomes excessive, turn off for a few hours and empty the Drip Tray
underneath the machine afterward.
Thank you for purchasing the Jägermeister
®
Speed Pour Tower
RETAIN YOUR ORIGINAL BOX AND PACKING
MATERIALS FOR A PERIOD OF 1 YEAR.
THESE ITEMS ARE NEEDED IF YOUR FREEZER
REQUIRES SERVICE OR REPAIRS.
For information on requesting service or repairs, visit:
www.tapmachine.com
