background image

 

CM-200 MCL / CB-200 MCL

 

 

 

8.

 

Camera Control Tool for CM-200

 

MCL / CB-200

 

MCL  

The camera control Tool for Windows 2000/XP can be downloaded from 

www.jai.com

.   

The control tool contents a camera control program and a developer’s kit for integrating the 

control tool in your own software.  For the integrator and experienced user, the Camera Control 
Toll is much more than a program with a window interface. It also provides an easy and efficient 
ActiveX interface built for MS Windows 2000/XP. The OCX interface has the ability to connect to 

the camera using the serial interface of the PC by reading and writing properties for the camera. 

This integration requires simple programming skills within Visual Basic, Visual C++ or similar 
languages in a Microsoft Windows environment.  

8.1.

 

Camera Control Tool Interface  

The Camera Control Tool Software is based on a main Tool Bar and a number of associated 
Tool Windows. Each button in the Tool Bar pops up a separate Tool Window when pressed. 

The layout of the program can be adjusted by arranging the windows the way it is preferred. 
The program will store this information and recreate this layout, when the program is 
restarted. All Camera Control Tools have a Communication Window and an About Window. 
The other window(s) contains camera control commands.  

 

8.1.1.

 

Camera Control Tool Bar  

This is a Camera Control Tool Bar and when the button of each widow, each control GUI can be 
initiated.  

  

 

  

  

About Window 

  

  
 

Communication Window 

Camera Control  Window 

8.2.

 

The About Window  

The about window contains information 
about the version of the program, Internet 
connection to JAI A/S and access to the 
help documents.  
 
The drop-down List box labelled “ Help 
File”  will list all files, which have the 
extension .pdf and that are found in the 
program (default) folder. 

                                      

 

 

It is possible to download updated 
operation manuals from the "downloads" 
section at the JAI website:  

http://www.jai.com 

An updated manual can be saved in the folder address mentioned above and it will automatically 
be included in the list of help files.  

 

- 23 – 

 

   

Summary of Contents for CB-200MCL





































Reviews: