CM-200 MCL / CB-200 MCL
1.
General
CM-200
MCL is a monochrome progressive scan CCD camera and CB-200
MCL is the equivalent
Bayer mosaic progressive scan CCD camera. Both have 2.0M pixels resolutions.
These camera are suitable for a wide range of applications within factory automation, an also for
applications outside the factory floor, such as ITS (Intelligent Traffic Solutions), high-end
surveillance and medical.
The latest version of this manual can be downloaded from: www.jai.com
The latest version of Camera Control Tool for CM-200MCL/CB-200MCL can be downloaded from:
www.jai.com
For camera revision history, please contact your local JAI distributor.
2.
Camera nomenclature
The standard camera composition consists of the camera main body and C-mount protection cap.
The camera is available in the following versions:
CM-200
MCL
Where
C
stands for "Compact" family,
M
stands for "Monochrome",
200
represents the resolution "2
million pixel" and
MCL
stands for "Mini-CL" interface
CB-200
MCL
Where
C
stands for "Compact" family,
B
stands for "Bayer mosaic color",
200
represents the
resolution "2 million pixel" and
MCL
stands for "Mini-CL" interface
3.
Main Features
•
Compact series 1/1.8 inch progressive scan camera
•
Monochrome and Bayer mosaic color versions
•
1620 (h) x 1236 (v) active pixels
•
4.4 µm square pixels
•
25 frames / second with full resolution in continuous operation
•
24 frames / second with external trigger and full resolution
•
Up to 99 frames with partial scan
•
49 frames / second with vertical binning ( CM-200 MCL only )
•
Shutter speed from 32 µs to 2 second ( 48 frames) using pulse width control
•
Programmable exposure from 64 µs to 40 ms
•
Pre-Select and Pulse Width control trigger modes
•
LVAL –synchronous /-asynchronous operation ( auto –detect )
•
Power over CL (PoCL) version available
•
Auto iris lens video output allows a wider range of light
•
10 bit or 8 bit output
•
Set up by Windows NT/Win 2000/ XP via serial communications
- 3 –
